Scholarlink

Abstract <p>In determining elastic workpiece flexure in turning, two approaches are employed: (1) solving the equation of the elastic line in discrete workpiece segments, taking account of the accumulated modal energy due to the cutting forces, the mechanical properties, and the workpiece configuration; (2) using neural networks in developing a model for predicting the dimensional deviation of the workpiece, taking account of the cutting depth, which is calculated on the basis of the final diameter.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Predicting Elastic Workpiece Flexure Produced by Cutting Forces in Turning

  • 期刊论文

  • 发表日期：

    2026年1月1日

查看全文
  • D. V. Simakov,
  • V. P. Legaev

摘要

Abstract

In determining elastic workpiece flexure in turning, two approaches are employed: (1) solving the equation of the elastic line in discrete workpiece segments, taking account of the accumulated modal energy due to the cutting forces, the mechanical properties, and the workpiece configuration; (2) using neural networks in developing a model for predicting the dimensional deviation of the workpiece, taking account of the cutting depth, which is calculated on the basis of the final diameter.