Scholarlink

Abstract <p>The study examined changes in the strength and plasticity characteristics of medium‑carbon unalloyed steels 30 and 45 during drawing of rolled stock with reductions from 5 to 60%. A set of mechanical properties of the investigated structural steels after strain hardening under the specified deformations was obtained. A comparative evaluation was carried out for each stage of deformation of the rolled stock at different reductions, and hardening curves under compression of specimens were constructed. Recommendations are given for manufacturing components with strength ≥600 MPa.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

The Effect of Compression during Drawing on the Mechanical Properties of Certain Medium Carbon Steels

  • 期刊论文

  • 发表日期：

    2026年1月1日

查看全文
  • A. A. Filippov,
  • G. V. Pachurin,
  • N. A. Kuz’min,
  • V. V. Galkin

摘要

Abstract

The study examined changes in the strength and plasticity characteristics of medium‑carbon unalloyed steels 30 and 45 during drawing of rolled stock with reductions from 5 to 60%. A set of mechanical properties of the investigated structural steels after strain hardening under the specified deformations was obtained. A comparative evaluation was carried out for each stage of deformation of the rolled stock at different reductions, and hardening curves under compression of specimens were constructed. Recommendations are given for manufacturing components with strength ≥600 MPa.