Scholarlink

Abstract <p>Using the results of finite element computer modeling in QForm for four-high helical rolling of steel blanks at various roll feed angles, the nature of shear deformations was determined. For this purpose, changes in the shape and size of individual cubes in various regions of the blank were assessed. In all regions, there is a noticeable (up to 1.5 times) increase in edge length in the rolling direction. Pure shear predominates at all roll feed angles at the center and at a distance of 0.5 workpiece radii from the center. Simple shear at the workpiece surface is clearly expressed in all three directions, with deviations of the angles between the edges from the initial 90 degrees reaching 20–40 degrees.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Assessment of Shear Deformations in Four-Roll Screw Rolling Processes Based on Computer Simulation

  • 期刊论文

  • 发表日期：

    2025年12月1日

查看全文
  • M. M. Skripalenko,
  • V. V. Panasyuk,
  • S. O. Rogachev,
  • V. S. Yusupov,
  • V. A. Andreev

摘要

Abstract

Using the results of finite element computer modeling in QForm for four-high helical rolling of steel blanks at various roll feed angles, the nature of shear deformations was determined. For this purpose, changes in the shape and size of individual cubes in various regions of the blank were assessed. In all regions, there is a noticeable (up to 1.5 times) increase in edge length in the rolling direction. Pure shear predominates at all roll feed angles at the center and at a distance of 0.5 workpiece radii from the center. Simple shear at the workpiece surface is clearly expressed in all three directions, with deviations of the angles between the edges from the initial 90 degrees reaching 20–40 degrees.