Scholarlink

Abstract <p>When manufacturing parts, it is necessary to take into account the conditions in which they will work, and loads that will affect them. This article is devoted to the study of the impact strength of parts with a cellular structure, manufactured on a 3D printer and strengthened by introducing reinforcing components (component hardening). A comparison of the results obtained for different types of a filler is shown, and the dependence of the impact strength index on the type of a filler and the percentage of filling with the base material is investigated.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Study of Viscoelastic Properties of Parts Made Using 3D Printing Methods with Various Ways of Structure Hardening

  • 期刊论文

  • 发表日期：

    2025年9月1日

查看全文
  • I. S. Dolgolenko,
  • I. S. Nefelov,
  • A. Yu. Konoplin

摘要

Abstract

When manufacturing parts, it is necessary to take into account the conditions in which they will work, and loads that will affect them. This article is devoted to the study of the impact strength of parts with a cellular structure, manufactured on a 3D printer and strengthened by introducing reinforcing components (component hardening). A comparison of the results obtained for different types of a filler is shown, and the dependence of the impact strength index on the type of a filler and the percentage of filling with the base material is investigated.