Scholarlink

Abstract <p>Control of the dimensions of heated forgings is a mandatory operation during processing on a forging press. At most enterprises, measurements are carried out manually using mechanical tools—calipers, crown calipers, metal rulers. This method of control has a number of significant drawbacks that reduce the efficiency of forging and increase the risk of producing defective products. The paper considers the main drawbacks and assesses the errors of the manual method, and proposes a solution for automating the control of the dimensions of hot cylindrical forgings using the Gefest photogrammetric system.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Automated Method of Control of Dimensions of Hot Forgings during Processing on a Forging Press

  • 期刊论文

  • 发表日期：

    2025年2月1日

查看全文
  • I. D. Nikolaev,
  • A. S. Janzhura,
  • M. A. Ivanov,
  • V. V. Petrov

摘要

Abstract

Control of the dimensions of heated forgings is a mandatory operation during processing on a forging press. At most enterprises, measurements are carried out manually using mechanical tools—calipers, crown calipers, metal rulers. This method of control has a number of significant drawbacks that reduce the efficiency of forging and increase the risk of producing defective products. The paper considers the main drawbacks and assesses the errors of the manual method, and proposes a solution for automating the control of the dimensions of hot cylindrical forgings using the Gefest photogrammetric system.