Scholarlink

Abstract <p>Enhancing the performance of PEMFCs significantly depends on the efficient diffusion of gases and the transport of water molecules. In this study, we utilized the high porosity and electrical conductivity of carbon fiber to promote the autonomous growth of lotus leaf graphene along the carbon fiber substrate. This innovation enables the creation of a gas cathode microporous layer for aspirated PEMFCs, which demonstrates high structural stability, minimal mass transfer resistance, and cost-effectiveness. Efficient gas diffusion and water transport are critical, as inadequate management of these factors can negatively impact battery lifespan and stability. The PEMFC cell with Gra/CC-60 exhibits a maximum current density of 1480&#xa0;mA/cm<sup>2</sup>, outperforming other samples. Additionally, the peak power density reaches 398.9 mW/cm<sup>2</sup> at 0.43 V. Remarkably, after 12 hours of operation at high current density, the PEMFC cell shows only a 7.94% drop in current density. This research paves the way for the development of microporous layers for fuel cells, sensors, and catalytic modules, while also introducing a novel approach to the selection and design of carbon materials.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Carbon Cloth with Graphene Films as Cathodic Microporous Layer in Air-Breathing Proton Exchange Membrane Fuel Cells (PEMFCs)

  • 期刊论文

  • 发表日期：

    2025年3月31日

查看全文
  • Zihao Chen,
  • Zitong Huang,
  • Liangliang Sun,
  • Junbo Wang,
  • Hailong Xiong,
  • Haoyu Yang,
  • Jinwen Yang

摘要

Abstract

Enhancing the performance of PEMFCs significantly depends on the efficient diffusion of gases and the transport of water molecules. In this study, we utilized the high porosity and electrical conductivity of carbon fiber to promote the autonomous growth of lotus leaf graphene along the carbon fiber substrate. This innovation enables the creation of a gas cathode microporous layer for aspirated PEMFCs, which demonstrates high structural stability, minimal mass transfer resistance, and cost-effectiveness. Efficient gas diffusion and water transport are critical, as inadequate management of these factors can negatively impact battery lifespan and stability. The PEMFC cell with Gra/CC-60 exhibits a maximum current density of 1480 mA/cm2, outperforming other samples. Additionally, the peak power density reaches 398.9 mW/cm2 at 0.43 V. Remarkably, after 12 hours of operation at high current density, the PEMFC cell shows only a 7.94% drop in current density. This research paves the way for the development of microporous layers for fuel cells, sensors, and catalytic modules, while also introducing a novel approach to the selection and design of carbon materials.