Scholarlink

<p>Titanium sheets were anodized using a solution composed of HCl, ethylene glycol, and deionized water. To incorporate the doping elements, the salts K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> and Co(NO<sub>3</sub>)<sub>2</sub>·6H<sub>2</sub>O were added individually. The anodized sheets were heated to 600&#xa0;°C, leading to a combination of anatase and rutile. A decrease in the intensity of the Raman spectra in the anatase/rutile vibrational modes indicated a reduction in crystallite size, which was corroborated by the Scherrer approximation. X-Ray Photoelectron Spectroscopy demonstrated the presence of 2p titanium and 1s oxygen in all samples, 2p chromium for the doped sample, and lower energies in the titanium and oxygen bands for the cobalt-doped sample. The calculation of the residual stresses revealed that the doped films presented higher compressive stresses, which led to higher Vickers microhardness values. It was possible to observe a decrease in the coefficient of friction of 50% for the doped samples compared to the undoped one.</p> Graphical Abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Synthesis of anodized films of TiO2, chromium-doped TiO2 and cobalt-doped TiO2 for structural, hardness and friction coefficient analysis

  • 期刊论文

  • 发表日期：

    2024年12月31日

查看全文
  • S. Hernández Montiel,
  • S. Muhl,
  • L. Zamora Peredo,
  • J. Hernández Torres,
  • N. Flores Ramírez,
  • L. García González

摘要

Titanium sheets were anodized using a solution composed of HCl, ethylene glycol, and deionized water. To incorporate the doping elements, the salts K2Cr2O7 and Co(NO3)2·6H2O were added individually. The anodized sheets were heated to 600 °C, leading to a combination of anatase and rutile. A decrease in the intensity of the Raman spectra in the anatase/rutile vibrational modes indicated a reduction in crystallite size, which was corroborated by the Scherrer approximation. X-Ray Photoelectron Spectroscopy demonstrated the presence of 2p titanium and 1s oxygen in all samples, 2p chromium for the doped sample, and lower energies in the titanium and oxygen bands for the cobalt-doped sample. The calculation of the residual stresses revealed that the doped films presented higher compressive stresses, which led to higher Vickers microhardness values. It was possible to observe a decrease in the coefficient of friction of 50% for the doped samples compared to the undoped one.

Graphical Abstract