Scholarlink

<p>Direct energy deposition–laser beam (DED-LB) was performed using duplex stainless steel (DSS) 2507 powders. Single and multilayer samples were printed to determine how reheating from additional layers affects austenite formation. Unlike laser powder bed fusion (PBF-LB) of DSS producing negligible austenite, DED-LB-printed DSS exhibited ~ 20% austenite in the single layer that increased to ~ 25% after printing subsequent layers. Transient-thermal numerical simulations and thermodynamic calculations were performed to predict phase formation. The calculations suggest that the increased austenite is due to solid-state (ferrite to austenite) phase formation after solidification and subsequent reheating followed by relatively slower cooling rates.</p> Graphical abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Austenite phase evolution in duplex stainless steels printed using laser directed energy deposition

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年4月17日

查看全文
  • Mustafa Tobah,
  • Rohan Somashekara,
  • Amit Misra

摘要

Direct energy deposition–laser beam (DED-LB) was performed using duplex stainless steel (DSS) 2507 powders. Single and multilayer samples were printed to determine how reheating from additional layers affects austenite formation. Unlike laser powder bed fusion (PBF-LB) of DSS producing negligible austenite, DED-LB-printed DSS exhibited ~ 20% austenite in the single layer that increased to ~ 25% after printing subsequent layers. Transient-thermal numerical simulations and thermodynamic calculations were performed to predict phase formation. The calculations suggest that the increased austenite is due to solid-state (ferrite to austenite) phase formation after solidification and subsequent reheating followed by relatively slower cooling rates.

Graphical abstract