Scholarlink

<p>The maximum power point tracking (MPPT) algorithm and the power converter must be precisely controlled in order to maximize energy extraction from photovoltaic (PV) systems. Four high-power DC–DC boost converters are modeled, designed, and optimized in this work. The system uses a two-stage control architecture where a proportional-integral (PI) controller controls the converter output and an Enhanced Perturb and Observe (EPO) algorithm predicts the maximum power point (MPP) voltage. Accelerated Particle Swarm Optimization (APSO), the Adaptive Spiral Dynamic Algorithm (ASDA), and a hybrid APSO–ASDA approaches were used to adjust the PI gains. The hybrid algorithm delivered the best overall performance, achieving fast rise times (0.3671–0.5691&#xa0;s), short settling durations (0.5853–0.9267&#xa0;s), and almost eliminating overshoots. Under typical test conditions, the converters' extraction efficiencies exceeded 98%, and they showed good performance in the face of changes in temperature, irradiance, load disturbances, and PV shades. System-level grid-integration study, including deployment inside an 11&#xa0;kV multilevel inverter interface, is specified as future work because this work solely concentrates on converter-level performance.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optimal PI controller design for high-efficiency DC–DC boost converters with enhanced perturb-and-observe MPPT in photovoltaic systems

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年2月16日

查看全文
  • M. J. Deshi,
  • E. C. Anene,
  • J. T. Agee,
  • S. M. Hassan

摘要

The maximum power point tracking (MPPT) algorithm and the power converter must be precisely controlled in order to maximize energy extraction from photovoltaic (PV) systems. Four high-power DC–DC boost converters are modeled, designed, and optimized in this work. The system uses a two-stage control architecture where a proportional-integral (PI) controller controls the converter output and an Enhanced Perturb and Observe (EPO) algorithm predicts the maximum power point (MPP) voltage. Accelerated Particle Swarm Optimization (APSO), the Adaptive Spiral Dynamic Algorithm (ASDA), and a hybrid APSO–ASDA approaches were used to adjust the PI gains. The hybrid algorithm delivered the best overall performance, achieving fast rise times (0.3671–0.5691 s), short settling durations (0.5853–0.9267 s), and almost eliminating overshoots. Under typical test conditions, the converters' extraction efficiencies exceeded 98%, and they showed good performance in the face of changes in temperature, irradiance, load disturbances, and PV shades. System-level grid-integration study, including deployment inside an 11 kV multilevel inverter interface, is specified as future work because this work solely concentrates on converter-level performance.