Scholarlink

<p>Phase change materials (PCMs) can mitigate early age thermal cracking in mass concrete but usually reduce mechanical strength due to their low stiffness and weak bonding to the cement matrix. This study investigates a hybrid fiber strategy using steel fibers (SF) and carbon fibers (CF) to compensate for this strength loss in phase change concrete (PCC). Single-factor tests and response surface methodology (RSM) were used to quantify the effects of phase change aggregate (PCA) replacement ratio and fiber contents and to optimize the hybrid system. Compared with plain PCC containing 50% PCA, mixtures with 1.0% SF and 0.3% CF increased the 28-day compressive/splitting tensile strengths by 11.15%/34.57% and 8.90%/27.78%, respectively, whereas the RSM-predicted optimal hybrid combination (0.895% SF + 0.291% CF) produced the greatest gains, with strength increases of 20.98% in compression and 42.28% in splitting tension. The quadratic RSM models (<i>R</i><sup>2</sup> &gt; 0.97) predicted 28-day strengths of 50.57 MPa and 4.61 MPa, which agreed with experimental results within 5%. These findings confirm a clear synergistic effect between SF and CF in terms of 28-day mechanical strength performance within the investigated dosage ranges and demonstrate that hybrid fiber reinforcement is an effective way to enhance the mechanical performance of functional PCM-based concrete.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Study on Mechanical Properties of Hybrid Fiber-Reinforced Phase Change Concrete

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年3月12日

查看全文
  • Zhenhua Wang,
  • Zhiwen Jia,
  • Tiantian Jiang,
  • Xiqi Liu,
  • Gang Wang,
  • Minghua Hu

摘要

Phase change materials (PCMs) can mitigate early age thermal cracking in mass concrete but usually reduce mechanical strength due to their low stiffness and weak bonding to the cement matrix. This study investigates a hybrid fiber strategy using steel fibers (SF) and carbon fibers (CF) to compensate for this strength loss in phase change concrete (PCC). Single-factor tests and response surface methodology (RSM) were used to quantify the effects of phase change aggregate (PCA) replacement ratio and fiber contents and to optimize the hybrid system. Compared with plain PCC containing 50% PCA, mixtures with 1.0% SF and 0.3% CF increased the 28-day compressive/splitting tensile strengths by 11.15%/34.57% and 8.90%/27.78%, respectively, whereas the RSM-predicted optimal hybrid combination (0.895% SF + 0.291% CF) produced the greatest gains, with strength increases of 20.98% in compression and 42.28% in splitting tension. The quadratic RSM models (R2 > 0.97) predicted 28-day strengths of 50.57 MPa and 4.61 MPa, which agreed with experimental results within 5%. These findings confirm a clear synergistic effect between SF and CF in terms of 28-day mechanical strength performance within the investigated dosage ranges and demonstrate that hybrid fiber reinforcement is an effective way to enhance the mechanical performance of functional PCM-based concrete.