Scholarlink

Purpose <p>Anodal block is a common mechanism used to generate unidirectional activation of myelinated nerve fibers. However, nerve block is often inconsistent and difficult to achieve. In this study, we used a computational model to investigate electrode cuff designs that can be exploited to enhance anodal block.</p> Methods <p>Asymmetric bipolar and tripolar nerve cuff electrodes were initially tested and validated in a rodent sciatic nerve model. A finite element model was implemented, with physical dimensions approximating a rat sciatic nerve implanted with a flat-interface nerve electrode. The McIntyre–Richardson–Grill model was used to predict the activation, block, and reactivation thresholds of myelinated fibers (diameter = 5.7 to 16&#xa0;μm) as the stimulation amplitude was increased. In vivo experiments were performed using identical nerve cuff electrodes. The asymmetric electrode designs were subsequently investigated using a human-sized model of a nerve implanted with a cylindrical cuff electrode. Key design parameters included the electrode edge length (EEL), anodic contact width, inter-electrode distance, and current division between primary and secondary anodes.</p> Results <p>The rodent model reproduced blocking properties in both computational and in vivo studies, where maximum anodic block reached 88% and 75% of activated fibers, respectively. Simulations involving the human nerve model identified two critical design parameters that can markedly enhance anodal block. An optimal distal EEL (≤ 1&#xa0;mm) enhanced the performance of bipolar stimulation (anodic block = 91%), whereas, optimizing the current ratio between the primary:secondary anodes (e.g., 6:4) enhanced nerve block in asymmetric tripolar electrodes (anodic block = 90%).</p> Conclusion <p>This study presents a set of instructions for optimizing the anodal blocking properties of nerve cuff electrodes, where an asymmetric tripolar design with variable anodic current offers a novel method that can adjust for variability at the nerve electrode interface.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Asymmetric tripolar nerve cuff electrode designs for optimizing anodal block of myelinated fibers

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年5月23日

查看全文
  • Daniel Tovbis,
  • Ryan G. L. Koh,
  • Rania Jeong,
  • Paul B. Yoo

摘要

Purpose

Anodal block is a common mechanism used to generate unidirectional activation of myelinated nerve fibers. However, nerve block is often inconsistent and difficult to achieve. In this study, we used a computational model to investigate electrode cuff designs that can be exploited to enhance anodal block.

Methods

Asymmetric bipolar and tripolar nerve cuff electrodes were initially tested and validated in a rodent sciatic nerve model. A finite element model was implemented, with physical dimensions approximating a rat sciatic nerve implanted with a flat-interface nerve electrode. The McIntyre–Richardson–Grill model was used to predict the activation, block, and reactivation thresholds of myelinated fibers (diameter = 5.7 to 16 μm) as the stimulation amplitude was increased. In vivo experiments were performed using identical nerve cuff electrodes. The asymmetric electrode designs were subsequently investigated using a human-sized model of a nerve implanted with a cylindrical cuff electrode. Key design parameters included the electrode edge length (EEL), anodic contact width, inter-electrode distance, and current division between primary and secondary anodes.

Results

The rodent model reproduced blocking properties in both computational and in vivo studies, where maximum anodic block reached 88% and 75% of activated fibers, respectively. Simulations involving the human nerve model identified two critical design parameters that can markedly enhance anodal block. An optimal distal EEL (≤ 1 mm) enhanced the performance of bipolar stimulation (anodic block = 91%), whereas, optimizing the current ratio between the primary:secondary anodes (e.g., 6:4) enhanced nerve block in asymmetric tripolar electrodes (anodic block = 90%).

Conclusion

This study presents a set of instructions for optimizing the anodal blocking properties of nerve cuff electrodes, where an asymmetric tripolar design with variable anodic current offers a novel method that can adjust for variability at the nerve electrode interface.