Scholarlink

Background <p>Gates’ Glomerular Filtration Rate (GFR) measurement via SPECT dynamic renal scintigraphy is common in clinical practice. However, its accuracy is limited by the variability of renal depth (RD) estimated by the conventional height- and weight-based Tonnesen formula, particularly in patients with renal tumors. This study compared a novel standalone CT RD estimation via deep learning segmentation and GFR measurement method against the Tonnesen formula between renal tumor and non-tumor groups, using the double plasma sample method (DPSM) as the reference standard.</p> Methods <p>A retrospective analysis was conducted on 99 patients from January to December 2024, categorized into renal tumor group (<i>n</i> = 23) and non-tumor group (<i>n</i> = 76). All patients underwent <sup>99m</sup>Tc-DTPA SPECT/CT dynamic renal scintigraphy, standalone abdominal CT, serum creatinine (Scr) testing, and DPSM. Five GFR measurement methods were compared and analyzed : (1) Gates’ method with deep learning-based standalone CT segmentation and RD estimation, (2) Gates’ method using Tonnesen’s RD via Siemens software, (3) Gates’ method using Tonnesen’s RD via MMIS software, (4) Scr-based estimation, and (5) DPSM serving as the reference standard. Welch’s independent t-tests were conducted statistically to compare various GFRs between tumor and non-tumor groups. Pearson correlation coefficients were used to evaluate relationships among the various GFR methods.</p> Results <p>Standalone CT-derived RDs were greater than Tonnesen formula estimation. Particularly in the tumor group, CT-derived vs. Tonnesen RDs were 7.30 ± 1.51&#xa0;cm vs. 5.97 ± 1.07&#xa0;cm (left), and 7.15 ± 1.27&#xa0;cm vs. 6.01 ± 1.08&#xa0;cm (right). The mean total GFR measurements using the reference standard DPSM, CT-derived RD, Tonnesen’s RD via Siemens and MMIS software, and Scr-based, were 87.91 ± 19.53, 94.61 ± 28.11, 77.29 ± 17.93, 79.28 ± 23.98, and 81.71 ± 23.31 mL/min for the tumor group, 77.56 ± 11.04, 81.30 ± 30.67, 68.07 ± 22.86, 68.22 ± 24.16, and 76.15 ± 30.65 mL/min for the non-tumor group. The CT-based measurements showed numerically higher correlation with DPSM (<i>r</i> = 0.915 for the tumor group; <i>r</i> = 0.825 for the non-tumor group), compared with Tonnesen-based measurements (<i>r</i> &lt; 0.8 for both subgroups). In paired method-comparison analysis, the CT-based GFR calculation showed descriptively smaller absolute differences from DPSM (21.47 mL/min) than the Tonnesen-based GFR methods (Siemens: 32.57 mL/min, MMIS: 27.04 mL/min) in tumor group.</p> Conclusions <p>In this preliminary cohort, Gates’ GFR calculation incorporating standalone abdominal CT-derived RD estimation via deep learning-based segmentation was associated with a higher correlation with DPSM and descriptively smaller absolute differences from DPSM than conventional Gates GFR with Tonnesen-derived RD estimation in patients with renal tumor. By leveraging existing diagnostic CT imaging, this method provided an exploratory, patient-specific RD estimation strategy and GFR calculation without requiring an additional CT acquisition, but its reliability and clinical utility warrant further validation in a larger cohort.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Evaluating Gates’ GFR accuracy in renal tumor patients through integration of standalone CT-derived renal depth estimation via deep learning segmentation: a preliminary study

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年7月27日

查看全文
  • Chunxing Wu,
  • Guangfeng Chen,
  • Qing Liao,
  • Feng Zhang,
  • Liangjun Xie,
  • Yueming Zha

摘要

Background

Gates’ Glomerular Filtration Rate (GFR) measurement via SPECT dynamic renal scintigraphy is common in clinical practice. However, its accuracy is limited by the variability of renal depth (RD) estimated by the conventional height- and weight-based Tonnesen formula, particularly in patients with renal tumors. This study compared a novel standalone CT RD estimation via deep learning segmentation and GFR measurement method against the Tonnesen formula between renal tumor and non-tumor groups, using the double plasma sample method (DPSM) as the reference standard.

Methods

A retrospective analysis was conducted on 99 patients from January to December 2024, categorized into renal tumor group (n = 23) and non-tumor group (n = 76). All patients underwent 99mTc-DTPA SPECT/CT dynamic renal scintigraphy, standalone abdominal CT, serum creatinine (Scr) testing, and DPSM. Five GFR measurement methods were compared and analyzed : (1) Gates’ method with deep learning-based standalone CT segmentation and RD estimation, (2) Gates’ method using Tonnesen’s RD via Siemens software, (3) Gates’ method using Tonnesen’s RD via MMIS software, (4) Scr-based estimation, and (5) DPSM serving as the reference standard. Welch’s independent t-tests were conducted statistically to compare various GFRs between tumor and non-tumor groups. Pearson correlation coefficients were used to evaluate relationships among the various GFR methods.

Results

Standalone CT-derived RDs were greater than Tonnesen formula estimation. Particularly in the tumor group, CT-derived vs. Tonnesen RDs were 7.30 ± 1.51 cm vs. 5.97 ± 1.07 cm (left), and 7.15 ± 1.27 cm vs. 6.01 ± 1.08 cm (right). The mean total GFR measurements using the reference standard DPSM, CT-derived RD, Tonnesen’s RD via Siemens and MMIS software, and Scr-based, were 87.91 ± 19.53, 94.61 ± 28.11, 77.29 ± 17.93, 79.28 ± 23.98, and 81.71 ± 23.31 mL/min for the tumor group, 77.56 ± 11.04, 81.30 ± 30.67, 68.07 ± 22.86, 68.22 ± 24.16, and 76.15 ± 30.65 mL/min for the non-tumor group. The CT-based measurements showed numerically higher correlation with DPSM (r = 0.915 for the tumor group; r = 0.825 for the non-tumor group), compared with Tonnesen-based measurements (r < 0.8 for both subgroups). In paired method-comparison analysis, the CT-based GFR calculation showed descriptively smaller absolute differences from DPSM (21.47 mL/min) than the Tonnesen-based GFR methods (Siemens: 32.57 mL/min, MMIS: 27.04 mL/min) in tumor group.

Conclusions

In this preliminary cohort, Gates’ GFR calculation incorporating standalone abdominal CT-derived RD estimation via deep learning-based segmentation was associated with a higher correlation with DPSM and descriptively smaller absolute differences from DPSM than conventional Gates GFR with Tonnesen-derived RD estimation in patients with renal tumor. By leveraging existing diagnostic CT imaging, this method provided an exploratory, patient-specific RD estimation strategy and GFR calculation without requiring an additional CT acquisition, but its reliability and clinical utility warrant further validation in a larger cohort.