Scholarlink

Abstract <p>The unique size-dependent properties of nano-objects make them valuable building blocks for creating advanced chemical systems, facilitating breakthroughs in different areas. In pervaporation, composite membranes with a thin selective nano-sized layer are being actively developed, allowing a highly efficient separation of different mixtures. In this study, highly efficient composite membranes were developed by creation of a thin dense selective layer from polyelectrolyte complex (PEC) from sodium alginate (SA) and polyethylenimine (PEI). Composite PEC membranes were prepared by three methods: (1) physical adsorption, (2)&#xa0;by layer-by-layer (Lbl) technique and (3) in a dynamic mode. The structure of the thin selective layer of membranes were studied by scanning electron (SEM) and atomic force (AFM) microscopies. The physical adsorption method is the most effective for obtaining highly efficient composite membranes from PEС: 0.05–1.18 kg/(m<sup>2</sup> h) permeation flux and more than 95 wt % water in the permeate in pervaporation dehydration of ethanol (4–70 wt % water).</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Pervaporation Efficiency of Composite Membranes Based on Sodium Alginate Polyelectrolyte Complex as a Function of Preparation Method

  • 期刊论文

  • 发表日期：

    2025年10月1日

查看全文
  • M. Dmitrenko,
  • O. Mikhailovskaya,
  • A. Kuzminova,
  • N. Yakimova,
  • S. Shipilovskikh,
  • A. Penkova

摘要

Abstract

The unique size-dependent properties of nano-objects make them valuable building blocks for creating advanced chemical systems, facilitating breakthroughs in different areas. In pervaporation, composite membranes with a thin selective nano-sized layer are being actively developed, allowing a highly efficient separation of different mixtures. In this study, highly efficient composite membranes were developed by creation of a thin dense selective layer from polyelectrolyte complex (PEC) from sodium alginate (SA) and polyethylenimine (PEI). Composite PEC membranes were prepared by three methods: (1) physical adsorption, (2) by layer-by-layer (Lbl) technique and (3) in a dynamic mode. The structure of the thin selective layer of membranes were studied by scanning electron (SEM) and atomic force (AFM) microscopies. The physical adsorption method is the most effective for obtaining highly efficient composite membranes from PEС: 0.05–1.18 kg/(m2 h) permeation flux and more than 95 wt % water in the permeate in pervaporation dehydration of ethanol (4–70 wt % water).