Scholarlink

<p>The properties of raw materials for preparing a batch of ceramic VK94-1 have been investigated. The influence of the initial components and the method of preparation of the mineral ceramic powder composition on the phase composition, microstructure, density, and mechanical properties of the sintered VK94-1 ceramic has been studied. It has been shown that preliminary grinding of quartz in a planetary mill and additional mixing of the initial component mixture after drying contribute to achieving a homogeneous phase composition of the mineral composition after synthesis at 1200–1500°C. Ceramic samples sintered in air at 1500–1650°C showed a bending strength of up to 289 MPa.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Effect of Manufacturing Method of Mineral Compound on Properties of Ceramic Material of VK94-1 Brand

  • 期刊论文

  • 发表日期：

    2025年8月2日

查看全文
  • I. E. Golubeva,
  • M. A. Goldberg,
  • V. V. Smirnov,
  • G. B. Telnova,
  • A. I. Sitnikov,
  • A. A. Konovalov,
  • A. S. Fomin,
  • S. V. Smirnov,
  • D. R. Khayrutdinova,
  • O. S. Antonova,
  • T. O. Obolkina,
  • K. A. Solntsev,
  • V. S. Komlev

摘要

The properties of raw materials for preparing a batch of ceramic VK94-1 have been investigated. The influence of the initial components and the method of preparation of the mineral ceramic powder composition on the phase composition, microstructure, density, and mechanical properties of the sintered VK94-1 ceramic has been studied. It has been shown that preliminary grinding of quartz in a planetary mill and additional mixing of the initial component mixture after drying contribute to achieving a homogeneous phase composition of the mineral composition after synthesis at 1200–1500°C. Ceramic samples sintered in air at 1500–1650°C showed a bending strength of up to 289 MPa.