Scholarlink

Abstract <p>To improve the tribological and anticorrosive performances of the copper alloy engine bearings, three types of EP/PAI/PI-PTFE coatings filled with ZnO and Ce<sub>2</sub>O<sub>3</sub> were prepared on the surfaces of CuPb22Sn2.5 by liquid spraying. Their performances and mechanisms were studied under different lubrication conditions and different temperatures. The results show that the excessive ZnO leads to agglomeration phenomenon and increases pores of the coating. As the content of Ce<sub>2</sub>O<sub>3</sub> increase, the pores and defects of the coatings are reduced, and the hydrophobicity of the coating is improved. The coating with 2 wt % ZnO + 3 wt % Ce<sub>2</sub>O<sub>3</sub> has the best wear resistance and corrosion resistance at all conditions. Hardness has the more dominant influence on wear rather than lubricant media.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Tribological and Anticorrosive Performances of EP/PAI/PI-PTFE Coatings Filled with ZnO and Ce2O3

  • 期刊论文

  • 发表日期：

    2025年12月1日

查看全文
  • Jialin Xiao,
  • Jun Cao,
  • Xiuli Zhang,
  • Yong Hu,
  • Dongqing He

摘要

Abstract

To improve the tribological and anticorrosive performances of the copper alloy engine bearings, three types of EP/PAI/PI-PTFE coatings filled with ZnO and Ce2O3 were prepared on the surfaces of CuPb22Sn2.5 by liquid spraying. Their performances and mechanisms were studied under different lubrication conditions and different temperatures. The results show that the excessive ZnO leads to agglomeration phenomenon and increases pores of the coating. As the content of Ce2O3 increase, the pores and defects of the coatings are reduced, and the hydrophobicity of the coating is improved. The coating with 2 wt % ZnO + 3 wt % Ce2O3 has the best wear resistance and corrosion resistance at all conditions. Hardness has the more dominant influence on wear rather than lubricant media.