Scholarlink

Abstract <p>Lead-free inorganic tin halide perovskite CsSnI<sub>3</sub> holds great promise for environmentally friendly photovoltaics, however it suffers from inefficient charge transport and interfacial recombination. This work presents a comprehensive numerical study using SCAPS-1D to synergistically optimize the electron transport layer (ETL, TiO<sub>2</sub>) and hole transport layer (HTL, Spiro-OMeTAD) in CsSnI<sub>3</sub>-based perovskite solar cells (PSCs). An optimal thickness of ~50 nm and a carrier concentration of ~1 × 10<sup>18</sup> cm<sup>–3</sup> for TiO<sub>2</sub> ETL yield the device performance of 18.13%, balancing the efficient electron extraction with minimized recombination. Device performance is more sensitive to the carrier concentration of the HTL than to that of the ETL. The&#xa0;CsSnI<sub>3</sub> layer performance is governed by the balance between the light absorption and recombination. The efficiency of solar cells increases significantly with carrier concentrations, peaking at 26.75% for doping levels between 2 × 10<sup>18</sup> to 1 × 10<sup>19</sup> cm<sup>–3</sup>. This peak performance coincides with a maximal <i>FF</i> of 86.90% and an improved <i>V</i><sub>OC</sub>, the latter driven by a stronger built-in electric field (IEF) enhancing the charge separation. These conversion efficiencies are theoretical upper limits (experimental devices currently achieve 14–17%), so the primary value of this work lies in the relative trends and optimal parameter ranges rather than the absolute numbers. In conclusion, this simulation study elucidates that synergistic optimization of ETL/HTL properties, focusing on thickness, carrier concentration, and defect minimization, is an important factor for improving device performance of lead-free tin-based perovskite solar cells, offering a potential theoretical reference for the experimental device engineering.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Synergistic Optimization of Charge Transport Layers for High-Efficiency Pb-Free CsSnI3 Perovskite Solar Cells

  • 期刊论文

  • 发表日期：

    2026年7月31日

查看全文
  • Yunxiang Zhang,
  • Yicheng Sheng,
  • Yuxin Zhang,
  • Zihan Tao,
  • Xinru Wang,
  • Keshun Nie,
  • Qinfang Zhang

摘要

Abstract

Lead-free inorganic tin halide perovskite CsSnI3 holds great promise for environmentally friendly photovoltaics, however it suffers from inefficient charge transport and interfacial recombination. This work presents a comprehensive numerical study using SCAPS-1D to synergistically optimize the electron transport layer (ETL, TiO2) and hole transport layer (HTL, Spiro-OMeTAD) in CsSnI3-based perovskite solar cells (PSCs). An optimal thickness of ~50 nm and a carrier concentration of ~1 × 1018 cm–3 for TiO2 ETL yield the device performance of 18.13%, balancing the efficient electron extraction with minimized recombination. Device performance is more sensitive to the carrier concentration of the HTL than to that of the ETL. The CsSnI3 layer performance is governed by the balance between the light absorption and recombination. The efficiency of solar cells increases significantly with carrier concentrations, peaking at 26.75% for doping levels between 2 × 1018 to 1 × 1019 cm–3. This peak performance coincides with a maximal FF of 86.90% and an improved VOC, the latter driven by a stronger built-in electric field (IEF) enhancing the charge separation. These conversion efficiencies are theoretical upper limits (experimental devices currently achieve 14–17%), so the primary value of this work lies in the relative trends and optimal parameter ranges rather than the absolute numbers. In conclusion, this simulation study elucidates that synergistic optimization of ETL/HTL properties, focusing on thickness, carrier concentration, and defect minimization, is an important factor for improving device performance of lead-free tin-based perovskite solar cells, offering a potential theoretical reference for the experimental device engineering.