Abstract <p>Traditional microwave resonator methods for plasma diagnostics face fundamental limitations at high plasma densities (<i>n</i>_e &gt; 10¹¹ cm^–3) due to the response nonlinearity and resonant peak broadening. The search for alternative approaches that provide accurate measurements over a wide range remains a topical issue. In this work, the feasibility of using the TM₁₁₀ (E₁₁₀) mode of a cylindrical resonator (radius <i>R</i> = 45 mm, length <i>H</i> = 30 mm) to measure the electron density in a gas-discharge plasma excited by a surface electromagnetic wave is studied experimentally and numerically. It is found that the coupling coefficient C_v for the TM₁₁₀ mode remains constant in the range <i>n</i>_e = 10¹¹–10¹² cm^–3, ensuring a linear dependence of the resonant frequency shift on the plasma density. The TM₁₁₀ mode demonstrates resistance to the resonant peak degradation at high plasma densities <i>n</i>_e, in contrast to the TM₀₁₀ mode, where the signal suppression was observed already at <i>n</i>_e ≈ 3 × 10¹¹ cm^–3. The obtained measurement results are in good agreement with the results of plasma density measurements using the transmitted wave method and the integrated plasma luminosity, as well as with literature data. The proposed modification of the method is suitable for noninvasive diagnostics of the longitudinal electron density distribution of gas discharge plasma, including plasma antennas.</p>