<p>The accurate study of heat transfer between water and steam at high pressures was achieved on a developed and tested model of a mixing unit for heat transfer flows (Direct-Contact Water Heater — DCWH). The test results showed that the water underheating to the saturation temperature at the model outlet is less than 1 and 2°C for two- and single-tray arrangement of the water-separation unit in the model, respectively. The droplet flow model is preferable for thermal calculation of the heating block in the DCWH.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Thermal calculation of the heating block of a high-pressure direct contact heater based on an experimental study

  • F. A. Svyatkin,
  • V. D. Lychakov,
  • Yu. V. Usov,
  • A. S. Matyash,
  • B. F. Balunov,
  • Yu. G. Sukhorukov,
  • P. V. Egorov

摘要

The accurate study of heat transfer between water and steam at high pressures was achieved on a developed and tested model of a mixing unit for heat transfer flows (Direct-Contact Water Heater — DCWH). The test results showed that the water underheating to the saturation temperature at the model outlet is less than 1 and 2°C for two- and single-tray arrangement of the water-separation unit in the model, respectively. The droplet flow model is preferable for thermal calculation of the heating block in the DCWH.