Scholarlink

<p>The results of a study on the strength of composite materials based on 3D-printed frameworks made using FDM technology from ABS plastic with a 33% fill are presented. The frameworks are impregnated with a thermosetting compound based on ED-20 epoxy resin with the TETA hardener, incorporating acetone diluents in amounts up to 1.5 wt % and DEG-1 in amounts up to 5 wt % to reduce viscosity.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Study of the Strength of Composites Based on 3D-Printed Frames Impregnated with Thermosetting Compounds with Various Diluents

  • 期刊论文

  • 发表日期：

    2025年2月1日

查看全文
  • Yu. A. Goncharova,
  • A. A. Goncharov,
  • Yu. V. Maistrov,
  • P. D. Akulinichev

摘要

The results of a study on the strength of composite materials based on 3D-printed frameworks made using FDM technology from ABS plastic with a 33% fill are presented. The frameworks are impregnated with a thermosetting compound based on ED-20 epoxy resin with the TETA hardener, incorporating acetone diluents in amounts up to 1.5 wt % and DEG-1 in amounts up to 5 wt % to reduce viscosity.