Scholarlink

Abstract <p>The current collector has played a vital role in energy storage devices. However, the application of conventional current collectors is seriously hindered by their inherent characteristics of limited loading surface area. High specific surface area current collectors with high conductivity, three-dimensional (3D) structure and convenient preparation are believed to be the most suitable alternatives to build high-property supercapacitors. Herein, chemical vapor deposition was applied to prepare a 3D, high surface area nickel foam@carbon fibers (NF@CFs) current collector for supercapacitors. The supercapacitor electrode integrated by 3D NF@CFs and high active MnO<sub>2</sub> (MnO<sub>2</sub>/NF@CFs) delivered a considerable areal capacitance of 12.20 F/cm<sup>2</sup> under a current density of 1 mA/cm<sup>2</sup>, and the capacitance retained 86.1% of its initial value even after 2000 charging and discharging cycles, demonstrating the exceptional cyclic stability. Moreover, the symmetric supercapacitor assembled with MnO<sub>2</sub>/NF@CFs-40 attained a capacitance as high as 5.64 F/cm<sup>2</sup> at 1 mA/cm<sup>2</sup> and with a power density of 0.225 mW/cm<sup>2</sup>, the corresponding energy density of 0.159&#xa0;mW&#xa0;h/cm<sup>2</sup> could be acquired.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

MnO2 In-Situ Grown on 3D Nickel Foam@Carbon Fibers Current Collectors As Integrated Electrodes for Symmetric Supercapacitors

  • 期刊论文

  • 发表日期：

    2026年3月1日

查看全文
  • Wen Yang,
  • Mingjing Cao,
  • Xia Zhang,
  • Dongmei Zhai,
  • Yanyan Feng

摘要

Abstract

The current collector has played a vital role in energy storage devices. However, the application of conventional current collectors is seriously hindered by their inherent characteristics of limited loading surface area. High specific surface area current collectors with high conductivity, three-dimensional (3D) structure and convenient preparation are believed to be the most suitable alternatives to build high-property supercapacitors. Herein, chemical vapor deposition was applied to prepare a 3D, high surface area nickel foam@carbon fibers (NF@CFs) current collector for supercapacitors. The supercapacitor electrode integrated by 3D NF@CFs and high active MnO2 (MnO2/NF@CFs) delivered a considerable areal capacitance of 12.20 F/cm2 under a current density of 1 mA/cm2, and the capacitance retained 86.1% of its initial value even after 2000 charging and discharging cycles, demonstrating the exceptional cyclic stability. Moreover, the symmetric supercapacitor assembled with MnO2/NF@CFs-40 attained a capacitance as high as 5.64 F/cm2 at 1 mA/cm2 and with a power density of 0.225 mW/cm2, the corresponding energy density of 0.159 mW h/cm2 could be acquired.