Scholarlink

Abstract <p>The resistance of auxetic metamaterial samples manufactured on a 3D printer from flexible thermoplastic polyurethane (TPU 95A plastic) based on a cell in the form of a concave hexagon (metamaterials with negative Poisson’s ratio) to penetration by a rigid spherical striker along the normal was experimentally studied. Samples were prepared whose internal structure differed in the angle of rotation (0, 30, 45, 60, or 90 degrees) relative to the vertical axis. The samples were compared for their ability to reduce the kinetic energy of strikers at a velocity of approximately 190 m/s at temperatures of 5, 16, 25, and 35°C. It was found that, in the examined temperature range, the samples most effectively resist penetration by a striker at 25°C. Moreover, for all temperatures, the highest resistance is characteristic of auxetic metamaterials made of thermoplastic polyurethane, with a structure rotated by 90 degrees.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

On the Influence of Temperature of Flexible Auxetic Metamaterials on The Energy Loss of a Striker During Penetration

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年9月1日

查看全文
  • S. Yu. Ivanova,
  • K. Yu. Osipenko,
  • N. V. Banichuk,
  • A. I. Demin,
  • D. S. Lisovenko

摘要

Abstract

The resistance of auxetic metamaterial samples manufactured on a 3D printer from flexible thermoplastic polyurethane (TPU 95A plastic) based on a cell in the form of a concave hexagon (metamaterials with negative Poisson’s ratio) to penetration by a rigid spherical striker along the normal was experimentally studied. Samples were prepared whose internal structure differed in the angle of rotation (0, 30, 45, 60, or 90 degrees) relative to the vertical axis. The samples were compared for their ability to reduce the kinetic energy of strikers at a velocity of approximately 190 m/s at temperatures of 5, 16, 25, and 35°C. It was found that, in the examined temperature range, the samples most effectively resist penetration by a striker at 25°C. Moreover, for all temperatures, the highest resistance is characteristic of auxetic metamaterials made of thermoplastic polyurethane, with a structure rotated by 90 degrees.