Scholarlink

Abstract <p>The resistance of auxetic metamaterials based on a cell in the form of a concave hexagon (with a negative Poisson’s ratio) to penetration by a rigid spherical striker along the normal was experimentally studied. Samples of metamaterials with a chiral and non-chiral internal structure were made on a 3D printer from flexible thermoplastic polyurethane (TPU 95A plastic) and rigid e-PLA plastic. For all four types of metamaterials, samples were prepared whose internal structure differed in the rotation angle (0, 30, 60, or 90°) relative to the vertical axis. The samples were compared by their ability to reduce the kinetic energy of strikers at a speed of about 190 m/s at a temperature of 16°C. It&#xa0;was found that auxetics made of thermoplastic polyurethane with a non-chiral structure rotated by 90° are the most effective in terms of resistance to striker penetration. The dependence of the striker deviation on exit from the samples (up or down) on the direction of rotation of the internal structure of the sample at an angle from 0 to 90° clockwise or counterclockwise, respectively, was revealed.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Study of Resistance to Impact Penetration of Auxetic Metamaterials at Various Angles of Rotation of Their Internal Cellular Structure

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年8月1日

查看全文
  • S. Yu. Ivanova,
  • K. Yu. Osipenko,
  • N. V. Banichuk,
  • D. S. Lisovenko

摘要

Abstract

The resistance of auxetic metamaterials based on a cell in the form of a concave hexagon (with a negative Poisson’s ratio) to penetration by a rigid spherical striker along the normal was experimentally studied. Samples of metamaterials with a chiral and non-chiral internal structure were made on a 3D printer from flexible thermoplastic polyurethane (TPU 95A plastic) and rigid e-PLA plastic. For all four types of metamaterials, samples were prepared whose internal structure differed in the rotation angle (0, 30, 60, or 90°) relative to the vertical axis. The samples were compared by their ability to reduce the kinetic energy of strikers at a speed of about 190 m/s at a temperature of 16°C. It was found that auxetics made of thermoplastic polyurethane with a non-chiral structure rotated by 90° are the most effective in terms of resistance to striker penetration. The dependence of the striker deviation on exit from the samples (up or down) on the direction of rotation of the internal structure of the sample at an angle from 0 to 90° clockwise or counterclockwise, respectively, was revealed.