Scholarlink

<p>A laboratory-scale integrated beneficiation process was systematically developed and evaluated for the production of advanced industrial-grade, high-purity, high-whiteness silica from quartz ore sourced from the Zarrin-Cheshmeh deposit (Semnan Province, Iran). Initial characterization of the raw material (SiO₂ = 97.46 wt%) using XRF, XRD, PLM, and SEM–EDS revealed a complex mineralogical composition, comprising both free and locked impurity phases. These included lattice-bound and surface-associated contaminants such as Al₂O₃, Fe₂O₃, TiO₂, as well as clay minerals and chert fragments. A multi-stage beneficiation strategy was implemented, integrating physical pre-treatment steps (color sorting, scrubbing, shaking table separation, ultrasonic treatment, microwave treatment, and calcination) with subsequent chemical leaching stages (aqua regia at ambient temperature and 95&#xa0;°C, followed by HF–HCl treatment). Color sorting effectively removed visually identifiable chert and iron-stained particles at an early stage. Scrubbing combined with ultrasonic pre-treatment enhanced the liberation of surface-bound impurities and improved the efficiency of downstream separation. Calcination significantly reduced volatile species such as sulfates and chlorides, resulting in improved whiteness and enhanced mineral reactivity. Chemical leaching played a decisive role in final purification. Aqua regia treatment at 95&#xa0;°C achieved approximately 96.8% removal of Fe₂O₃, leading to a substantial improvement in silica grade. Subsequent HF–HCl leaching enabled near-complete breakdown of refractory aluminosilicate phases, with Al₂O₃ removal exceeding 92%, thereby producing ultra-high-purity silica. Although the integrated physical–chemical flowsheet was highly effective in upgrading silica quality, it resulted in an overall reduction of approximately 20% in SiO₂ recovery relative to the original feed. This trade-off reflects the selective removal of impurity-bearing mineral phases, which is necessary to achieve ultra-high purity levels.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Advanced beneficiation of quartz ore for high-purity silica production

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年7月13日

查看全文
  • Mostafa Chegini

摘要

A laboratory-scale integrated beneficiation process was systematically developed and evaluated for the production of advanced industrial-grade, high-purity, high-whiteness silica from quartz ore sourced from the Zarrin-Cheshmeh deposit (Semnan Province, Iran). Initial characterization of the raw material (SiO₂ = 97.46 wt%) using XRF, XRD, PLM, and SEM–EDS revealed a complex mineralogical composition, comprising both free and locked impurity phases. These included lattice-bound and surface-associated contaminants such as Al₂O₃, Fe₂O₃, TiO₂, as well as clay minerals and chert fragments. A multi-stage beneficiation strategy was implemented, integrating physical pre-treatment steps (color sorting, scrubbing, shaking table separation, ultrasonic treatment, microwave treatment, and calcination) with subsequent chemical leaching stages (aqua regia at ambient temperature and 95 °C, followed by HF–HCl treatment). Color sorting effectively removed visually identifiable chert and iron-stained particles at an early stage. Scrubbing combined with ultrasonic pre-treatment enhanced the liberation of surface-bound impurities and improved the efficiency of downstream separation. Calcination significantly reduced volatile species such as sulfates and chlorides, resulting in improved whiteness and enhanced mineral reactivity. Chemical leaching played a decisive role in final purification. Aqua regia treatment at 95 °C achieved approximately 96.8% removal of Fe₂O₃, leading to a substantial improvement in silica grade. Subsequent HF–HCl leaching enabled near-complete breakdown of refractory aluminosilicate phases, with Al₂O₃ removal exceeding 92%, thereby producing ultra-high-purity silica. Although the integrated physical–chemical flowsheet was highly effective in upgrading silica quality, it resulted in an overall reduction of approximately 20% in SiO₂ recovery relative to the original feed. This trade-off reflects the selective removal of impurity-bearing mineral phases, which is necessary to achieve ultra-high purity levels.