Scholarlink

<p>Miniaturized systems demand micro-components exhibiting high dimensional fidelity, superior surface quality, and complex geometries for aerospace, biomedical, and microelectronic applications. Micro-milling offers flexibility and precision, but consistent performance remains challenging by rapid tool degradation, burr generation, and size-effect-dominated cutting mechanism, particularly in high strength alloys. This study investigates machinability of Inconel 718 in low-speed micro-milling using uncoated and three coated micro-end mills, with feed rates defined relative to cutting-edge radius. Taguchi L16 orthogonal array methodically assesses the impact of cutting speed, feed rate, depth of cut, and tool coating across four distinct levels each, on surface roughness, tool wear, and burr formation. The experimental outcomes were evaluated statistically using Analysis of Variance (ANOVA), while Grey Relational Analysis (GRA) was applied to identify optimal machining conditions. Results reveal that TiAlN coatings improve surface finish, nACo suppresses burr formation, and uncoated tools enhance wear resistance. The optimal condition from GRA is 10.5&#xa0;m/min cutting speed, 1.5&#xa0;μm/tooth feed, and 120&#xa0;μm depth of cut with uncoated tool. Response Surface Methodology (RSM) yielded average reductions of 23.81%, 11.49%, and 18.11% in surface roughness, tool wear, and burr formation, respectively. This integrated Taguchi-ANOVA-GRA-RSM Optimization (TANGRO) framework provides robust insights for optimal machining performance.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Performance evaluation in micro-milling of Inconel 718 with coated tools through an integrated optimization framework

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年7月16日

查看全文
  • Ahmad Waqar Tehami,
  • Muhammad Rizwan Ul Haq,
  • Ahmad Sajjad,
  • Bilal Akbar Chuddher,
  • Shahid Ikramullah Butt,
  • Abdulsalam Alqarni,
  • Osamah Y. Moshebah

摘要

Miniaturized systems demand micro-components exhibiting high dimensional fidelity, superior surface quality, and complex geometries for aerospace, biomedical, and microelectronic applications. Micro-milling offers flexibility and precision, but consistent performance remains challenging by rapid tool degradation, burr generation, and size-effect-dominated cutting mechanism, particularly in high strength alloys. This study investigates machinability of Inconel 718 in low-speed micro-milling using uncoated and three coated micro-end mills, with feed rates defined relative to cutting-edge radius. Taguchi L16 orthogonal array methodically assesses the impact of cutting speed, feed rate, depth of cut, and tool coating across four distinct levels each, on surface roughness, tool wear, and burr formation. The experimental outcomes were evaluated statistically using Analysis of Variance (ANOVA), while Grey Relational Analysis (GRA) was applied to identify optimal machining conditions. Results reveal that TiAlN coatings improve surface finish, nACo suppresses burr formation, and uncoated tools enhance wear resistance. The optimal condition from GRA is 10.5 m/min cutting speed, 1.5 μm/tooth feed, and 120 μm depth of cut with uncoated tool. Response Surface Methodology (RSM) yielded average reductions of 23.81%, 11.49%, and 18.11% in surface roughness, tool wear, and burr formation, respectively. This integrated Taguchi-ANOVA-GRA-RSM Optimization (TANGRO) framework provides robust insights for optimal machining performance.