Scholarlink

<p>The increasing demand for sustainable construction materials calls for innovative strategies that reduce natural resource consumption while maintaining or enhancing material performance. This study investigates the use of polyethylene glycol (PEG) as an internal curing agent in high-performance fiber-reinforced composites (HPFRC) incorporating brick waste sand (BWS) and ceramic waste powder (CWP). BWS and CWP were introduced as partial replacements for river sand (RS) and cement, respectively, to promote waste valorization and improve particle packing. PEG was employed to facilitate internal curing, enhancing hydration efficiency and overall matrix quality. Fresh and hardened properties of the developed HPFRC mixtures were evaluated through workability, compressive strength, flexural strength, tensile response, and water absorption tests. Microstructural analysis using scanning electron microscopy (SEM) and X-ray diffraction (XRD) was conducted to assess hydration products, matrix densification, and interfacial bonding. Results indicate that PEG improved workability by compensating for the reduced slump caused by the angular texture of BWS. CWP contributed to better particle packing and matrix refinement, producing a denser microstructure. The optimized mixture containing 1.5% PEG, 50% BWS, and 10% CWP achieved the best overall performance, with compressive strength of 63&#xa0;MPa, tensile strength of approximately 7&#xa0;MPa, flexural strength of 15.89&#xa0;MPa, and water absorption of 1.15%. Microstructural observations confirmed improved matrix densification and interfacial bonding, demonstrating the synergistic effect of PEG-mediated internal curing and waste-derived materials. These findings validate the technical feasibility of incorporating PEG, BWS, and CWP in HPFRC, providing a practical approach for producing high-performance, resource-efficient composites with enhanced mechanical and durability characteristics.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Synergistic use of brick and ceramic wastes with polyethylene glycol in high-performance fiber-reinforced composites

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年6月18日

查看全文
  • Ali S. Ahmed,
  • Osama Youssf,
  • Mohamed M. Yousry Elshikh,
  • Khalid A. Eltawil,
  • Mohamed Ghalla,
  • Mostafa M. Keshta

摘要

The increasing demand for sustainable construction materials calls for innovative strategies that reduce natural resource consumption while maintaining or enhancing material performance. This study investigates the use of polyethylene glycol (PEG) as an internal curing agent in high-performance fiber-reinforced composites (HPFRC) incorporating brick waste sand (BWS) and ceramic waste powder (CWP). BWS and CWP were introduced as partial replacements for river sand (RS) and cement, respectively, to promote waste valorization and improve particle packing. PEG was employed to facilitate internal curing, enhancing hydration efficiency and overall matrix quality. Fresh and hardened properties of the developed HPFRC mixtures were evaluated through workability, compressive strength, flexural strength, tensile response, and water absorption tests. Microstructural analysis using scanning electron microscopy (SEM) and X-ray diffraction (XRD) was conducted to assess hydration products, matrix densification, and interfacial bonding. Results indicate that PEG improved workability by compensating for the reduced slump caused by the angular texture of BWS. CWP contributed to better particle packing and matrix refinement, producing a denser microstructure. The optimized mixture containing 1.5% PEG, 50% BWS, and 10% CWP achieved the best overall performance, with compressive strength of 63 MPa, tensile strength of approximately 7 MPa, flexural strength of 15.89 MPa, and water absorption of 1.15%. Microstructural observations confirmed improved matrix densification and interfacial bonding, demonstrating the synergistic effect of PEG-mediated internal curing and waste-derived materials. These findings validate the technical feasibility of incorporating PEG, BWS, and CWP in HPFRC, providing a practical approach for producing high-performance, resource-efficient composites with enhanced mechanical and durability characteristics.