Scholarlink

<p>Estimating the permeability of a three-dimensional (3D) discrete fracture network (DFN) based on its geometric properties can provide a useful alternative to the resource-intensive direct hydraulic computation of the 3D DFN. The analysis of the relationships between the dimensionless equivalent permeability of the 3D model (<i>K</i>’ 3D) and its geometric properties was conducted to elucidate the linkage between permeability and geometric characteristics. The geometric characteristics encompass fracture density (<i>ρ</i>), the power-law exponent (<i>a</i>) governing the fracture length distribution in the 3D model, and the fractal dimensions of the 2D cutting planes (<i>D</i><sub>f</sub>). A regression function with variables (<i>ρ</i>, <i>a,</i> and <i>D</i><sub>f</sub>) was proposed to predict <i>K</i>’ 3D. The results show that the calculated <i>K</i>’ 3D is in good agreement with the values predicted by the regression function reported in the literature. The <i>K</i>’ 3D increases following a linear relationship with the increment of <i>ρ</i> and decreases linearly with the increasing <i>a</i>. For the fracture network with <i>a</i> = 2.0, flow paths are composed of a few long fractures, whereas with <i>a</i> = 4.5, the flow path is composed of numerous minor fractures. The <i>D</i><sub>f</sub> follows an exponential relationship where it increases with increasing <i>ρ</i> and a linear one where it decreases with increment of <i>a</i>. The regression function with <i>D</i><sub>f</sub> can estimate the permeability of the 3D DFN model despite whether there are continuous flow paths in cutting planes. Compared to the findings predicted by the dimensionless equivalent permeability of the 2D cutting planes (<i>K</i>’ 2D), the anticipated outcomes from the regression function demonstrate a closer alignment with the simulated results.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Permeability prediction of 3D complex fracture networks in deep underground based on fractal analysis of trace maps

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年5月6日

查看全文
  • Jing Zhang,
  • Liyuan Yu,
  • Qi Ping,
  • Wei Li,
  • Ding Liu

摘要

Estimating the permeability of a three-dimensional (3D) discrete fracture network (DFN) based on its geometric properties can provide a useful alternative to the resource-intensive direct hydraulic computation of the 3D DFN. The analysis of the relationships between the dimensionless equivalent permeability of the 3D model (K’ 3D) and its geometric properties was conducted to elucidate the linkage between permeability and geometric characteristics. The geometric characteristics encompass fracture density (ρ), the power-law exponent (a) governing the fracture length distribution in the 3D model, and the fractal dimensions of the 2D cutting planes (Df). A regression function with variables (ρ, a, and Df) was proposed to predict K’ 3D. The results show that the calculated K’ 3D is in good agreement with the values predicted by the regression function reported in the literature. The K’ 3D increases following a linear relationship with the increment of ρ and decreases linearly with the increasing a. For the fracture network with a = 2.0, flow paths are composed of a few long fractures, whereas with a = 4.5, the flow path is composed of numerous minor fractures. The Df follows an exponential relationship where it increases with increasing ρ and a linear one where it decreases with increment of a. The regression function with Df can estimate the permeability of the 3D DFN model despite whether there are continuous flow paths in cutting planes. Compared to the findings predicted by the dimensionless equivalent permeability of the 2D cutting planes (K’ 2D), the anticipated outcomes from the regression function demonstrate a closer alignment with the simulated results.