Scholarlink

<p>This study presents an efficient and green strategy for the synthesis of amorphous metal-organic frameworks (MOFs). Hence, we synthesized a series of cerium (Ce)-based amorphous MOFs at room temperature using water as the sole solvent via screening the undissolved organic ligands. XRD and ATR-FTIR analyses confirmed the highly amorphous nature and preserved chemical structure of the synthesized Ce-MOFs, while N<sub>2</sub> adsorption/desorption and TGA results revealed mesoporosity and good thermal stability. The synthesized small-sized amorphous Ce-MOFs particles exhibited hierarchical pores in the range of 4–15&#xa0;nm, moderate surface areas (up to 280 m<sup>2</sup>/g), large pore volumes (up to 0.54 cm<sup>3</sup>/g), abundant active adsorption sites, and good structural stability, which are all beneficial for the efficient removal of the Ofloxacin (OFL) antibiotic from water. Among different synthesized amorphous Ce-MOFs, the Ce-MOF-A-2 with a surface area of 152 m<sup>2</sup>/g showed a high affinity toward OFL molecules, resulting in the highest experimental adsorption capacity of 138.98&#xa0;mg/g under optimal conditions (T = 298&#xa0;K, t = 4&#xa0;h, pH ≈ 8). The experimental adsorption data for this adsorbent followed the Langmuir isotherm and pseudo-second-order kinetic models, resulting in a maximum calculated adsorption capacity of 140.84&#xa0;mg/g, higher than its crystalline counterpart. Additionally, this amorphous adsorbent showed satisfactory regeneration and reusability performances, making it an acceptable adsorbent for water decontamination.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Green synthesis of amorphous Ce-MOFs as efficient adsorbents towards Ofloxacin antibiotics

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年2月27日

查看全文
  • Hossein Molavi,
  • Somayeh Saeedi,
  • Amirhosein Ghorbani

摘要

This study presents an efficient and green strategy for the synthesis of amorphous metal-organic frameworks (MOFs). Hence, we synthesized a series of cerium (Ce)-based amorphous MOFs at room temperature using water as the sole solvent via screening the undissolved organic ligands. XRD and ATR-FTIR analyses confirmed the highly amorphous nature and preserved chemical structure of the synthesized Ce-MOFs, while N2 adsorption/desorption and TGA results revealed mesoporosity and good thermal stability. The synthesized small-sized amorphous Ce-MOFs particles exhibited hierarchical pores in the range of 4–15 nm, moderate surface areas (up to 280 m2/g), large pore volumes (up to 0.54 cm3/g), abundant active adsorption sites, and good structural stability, which are all beneficial for the efficient removal of the Ofloxacin (OFL) antibiotic from water. Among different synthesized amorphous Ce-MOFs, the Ce-MOF-A-2 with a surface area of 152 m2/g showed a high affinity toward OFL molecules, resulting in the highest experimental adsorption capacity of 138.98 mg/g under optimal conditions (T = 298 K, t = 4 h, pH ≈ 8). The experimental adsorption data for this adsorbent followed the Langmuir isotherm and pseudo-second-order kinetic models, resulting in a maximum calculated adsorption capacity of 140.84 mg/g, higher than its crystalline counterpart. Additionally, this amorphous adsorbent showed satisfactory regeneration and reusability performances, making it an acceptable adsorbent for water decontamination.