Scholarlink

<p>The accurate calibration of bending stiffness of colloidal atomic force microscopy (AFM) probes is essential for reliable nanomechanical measurements, especially when large micro-spheres are used in biological applications. This study investigates the influence of frictional contact between an AFM spherical tip and the load button on stiffness measurements obtained via bending tests and proposes a new analytical model to account for this effect. Finite element simulations of frictional sliding contact between colloidal spheres and load button were conducted to validate the proposed model. A proof-of-principle experimental setup was developed to traceably acquire force-deflection curves of several typical colloidal AFM probes, and results showed good agreement (within 1.5 % deviation) with a validated stiffness calibration system. Experimental data for large-sphere colloidal probes confirmed the presence of a transition phase in the unloading curve due to frictional contact and demonstrated that accurate stiffness results can be obtained when friction is properly considered. Additionally, friction coefficients for four tip-surface material combinations were experimentally determined, providing broadly relevant data that can be effectively applied in AFM nanomechanics, especially in investigations of tip-sample interactions.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Traceable stiffness calibration of colloidal AFM probes for biomechanical measurements

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年2月5日

查看全文
  • Zhi Li,
  • Valeriya Cherkasova,
  • Sai Gao,
  • Thomas Fröhlich,
  • Uwe Brand

摘要

The accurate calibration of bending stiffness of colloidal atomic force microscopy (AFM) probes is essential for reliable nanomechanical measurements, especially when large micro-spheres are used in biological applications. This study investigates the influence of frictional contact between an AFM spherical tip and the load button on stiffness measurements obtained via bending tests and proposes a new analytical model to account for this effect. Finite element simulations of frictional sliding contact between colloidal spheres and load button were conducted to validate the proposed model. A proof-of-principle experimental setup was developed to traceably acquire force-deflection curves of several typical colloidal AFM probes, and results showed good agreement (within 1.5 % deviation) with a validated stiffness calibration system. Experimental data for large-sphere colloidal probes confirmed the presence of a transition phase in the unloading curve due to frictional contact and demonstrated that accurate stiffness results can be obtained when friction is properly considered. Additionally, friction coefficients for four tip-surface material combinations were experimentally determined, providing broadly relevant data that can be effectively applied in AFM nanomechanics, especially in investigations of tip-sample interactions.