<p>This study presents a sustainable approach for Methylene Blue (MB) dye removal using pristine, non-activated biochar derived from orange peel waste via Microwave-Assisted Pyrolysis (MAP). The key novelty lies in the systematic comparison of the biochar’s adsorption performance under both pH-controlled (constant pH 4) and unregulated pH conditions, demonstrating that pH regulation is essential for optimizing adsorption efficiency. The resulting biochar exhibited a high fixed carbon content (60.89%), an alkaline surface (Point of zero charge (pH<sub>pzc</sub>) = 11.20, ZPotential = 0.1&#xa0;mV @ pH 9), and oxygenated functional groups. Best MB removal of 83% was achieved at pH 4, despite the expected electrostatic repulsion. Kinetic studies showed the best fit with the Elovich model, indicating a heterogeneous surface. The Langmuir isotherm accurately described the equilibrium data, revealing a maximum adsorption capacity (q<sub>max</sub>) of 20.57&#xa0;mg g⁻<sup>1</sup> under pH-controlled conditions, representing an 83% increase over the 11.24&#xa0;mg g⁻<sup>1</sup> obtained in the unregulated scenario. Thermodynamic analysis confirmed the process is spontaneous (ΔG° &lt; 0), endothermic (ΔH° = + 4.88&#xa0;kJ mol⁻<sup>1</sup> at constant pH), and governed by physisorption mechanisms, including hydrogen bonding and π-π interactions. This work demonstrates that pristine orange peel biochar generated via MAP is a highly effective adsorbent and highlights the critical impact of pH control on improving adsorption capacity and elucidating the dominant physisorption mechanisms.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Kinetic, equilibrium, and thermodynamic study of Methylene Blue adsorption on orange peel biochar prepared by microwave-assisted pyrolysis

  • Jhonny Correa-Abril,
  • Elvia V. Cabrera,
  • Nilo Robles,
  • J. L. López Terán,
  • Ullrich Stahl

摘要

This study presents a sustainable approach for Methylene Blue (MB) dye removal using pristine, non-activated biochar derived from orange peel waste via Microwave-Assisted Pyrolysis (MAP). The key novelty lies in the systematic comparison of the biochar’s adsorption performance under both pH-controlled (constant pH 4) and unregulated pH conditions, demonstrating that pH regulation is essential for optimizing adsorption efficiency. The resulting biochar exhibited a high fixed carbon content (60.89%), an alkaline surface (Point of zero charge (pHpzc) = 11.20, ZPotential = 0.1 mV @ pH 9), and oxygenated functional groups. Best MB removal of 83% was achieved at pH 4, despite the expected electrostatic repulsion. Kinetic studies showed the best fit with the Elovich model, indicating a heterogeneous surface. The Langmuir isotherm accurately described the equilibrium data, revealing a maximum adsorption capacity (qmax) of 20.57 mg g⁻1 under pH-controlled conditions, representing an 83% increase over the 11.24 mg g⁻1 obtained in the unregulated scenario. Thermodynamic analysis confirmed the process is spontaneous (ΔG° < 0), endothermic (ΔH° = + 4.88 kJ mol⁻1 at constant pH), and governed by physisorption mechanisms, including hydrogen bonding and π-π interactions. This work demonstrates that pristine orange peel biochar generated via MAP is a highly effective adsorbent and highlights the critical impact of pH control on improving adsorption capacity and elucidating the dominant physisorption mechanisms.