Scholarlink

<p>Cationic dyes, even at low concentrations, pose serious risks to aquatic ecosystems and contribute to environmental pollution. Effective removal of these dyes is therefore essential for protecting water resources and marine life. This study investigates lignosulfonate-based adsorbents (L, LS, and LSR-F) for the removal of crystal violet (CV) dye from wastewater. Structural and physicochemical characterization using FTIR, Raman spectroscopy, SEM, TGA, and CHNS analysis confirmed the successful synthesis and functionalization of the adsorbents. Under optimal conditions (pH 8, 150&#xa0;mg/L CV, 0.1&#xa0;g adsorbent dose, room temperature), LSR-F achieved 98% removal efficiency within 15&#xa0;min. Kinetic modeling with five approaches (pseudo-first-order, pseudo-second-order, intraparticle diffusion, Boyd, and Elovich) revealed that adsorption followed the pseudo-second-order model, suggesting chemisorption as the dominant mechanism. Isotherm studies indicated that the Langmuir model best described the adsorption process, with LSR-F exhibiting a maximum adsorption capacity of 73.53&#xa0;mg/g. Thermodynamic analysis further showed that the process was spontaneous and endothermic. Overall, LSR-F demonstrates excellent potential as a cost-effective, sustainable adsorbent for removing toxic cationic dyes from wastewater. By utilizing bio-industrial residues, this approach supports multiple Sustainable Development Goals (SDGs), particularly SDG 6 (Clean Water and Sanitation), SDG 12 (Responsible Consumption and Production), SDG 13 (Climate Action), and SDG 14 (Life Below Water).</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Utilization of wastes from bioethanol production for the fabrication of new adsorbents for the removal of toxic dye in water

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年1月27日

查看全文
  • Khloud Eltaher,
  • Sara E. AbdElhafez,
  • Rehab M. Ali,
  • Ayman El-Faham,
  • Ali A. El-Bardan,
  • Hesham Hamad

摘要

Cationic dyes, even at low concentrations, pose serious risks to aquatic ecosystems and contribute to environmental pollution. Effective removal of these dyes is therefore essential for protecting water resources and marine life. This study investigates lignosulfonate-based adsorbents (L, LS, and LSR-F) for the removal of crystal violet (CV) dye from wastewater. Structural and physicochemical characterization using FTIR, Raman spectroscopy, SEM, TGA, and CHNS analysis confirmed the successful synthesis and functionalization of the adsorbents. Under optimal conditions (pH 8, 150 mg/L CV, 0.1 g adsorbent dose, room temperature), LSR-F achieved 98% removal efficiency within 15 min. Kinetic modeling with five approaches (pseudo-first-order, pseudo-second-order, intraparticle diffusion, Boyd, and Elovich) revealed that adsorption followed the pseudo-second-order model, suggesting chemisorption as the dominant mechanism. Isotherm studies indicated that the Langmuir model best described the adsorption process, with LSR-F exhibiting a maximum adsorption capacity of 73.53 mg/g. Thermodynamic analysis further showed that the process was spontaneous and endothermic. Overall, LSR-F demonstrates excellent potential as a cost-effective, sustainable adsorbent for removing toxic cationic dyes from wastewater. By utilizing bio-industrial residues, this approach supports multiple Sustainable Development Goals (SDGs), particularly SDG 6 (Clean Water and Sanitation), SDG 12 (Responsible Consumption and Production), SDG 13 (Climate Action), and SDG 14 (Life Below Water).