Scholarlink

<p>Piezoelectric composite materials have demonstrated significant potential for developing high-performance wearable sensors. However, optimizing the piezoelectric output performance in polymer-based devices remains challenging due to the suboptimal synergy between the piezoelectric reinforcement phase and substrate materials. Moreover, the instability of response signals further hampers the sensor’s practical utility. In this investigation, wet-spinning technology was applied to fabricate a novel Barium Titanate (BaTiO<sub>3</sub>)/Polyvinylidene fluoride (PVDF) composite fiber. Through this approach, we enhanced the piezoelectric properties of the material. Notably, our electron diffraction analysis revealed compelling lattice deformations in the ceramic particle-polymer interface, yielding significant enhancements in the piezoelectric characteristics. Remarkably, incorporating just 1.5 wt% of BaTiO<sub>3</sub> in PVDF led to a piezoelectric output of 0.88 V during dynamic cycle tests at 1&#xa0;Hz. Encouragingly, the output signal exhibited a robust linear correlation (R<sup>2</sup> = 0.996) with applied compression force.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Piezoelectric properties improvement in soft membrane with wet-spinning prepared barium titanate/polyvinylidenefluoride composites fiber

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年4月15日

查看全文
  • Xiong-Wei Lin,
  • Prasad Gajula,
  • Xiao-shan Luo,
  • Mingrui Zhao,
  • Xiao-bo Zhao,
  • Ye Fan

摘要

Piezoelectric composite materials have demonstrated significant potential for developing high-performance wearable sensors. However, optimizing the piezoelectric output performance in polymer-based devices remains challenging due to the suboptimal synergy between the piezoelectric reinforcement phase and substrate materials. Moreover, the instability of response signals further hampers the sensor’s practical utility. In this investigation, wet-spinning technology was applied to fabricate a novel Barium Titanate (BaTiO3)/Polyvinylidene fluoride (PVDF) composite fiber. Through this approach, we enhanced the piezoelectric properties of the material. Notably, our electron diffraction analysis revealed compelling lattice deformations in the ceramic particle-polymer interface, yielding significant enhancements in the piezoelectric characteristics. Remarkably, incorporating just 1.5 wt% of BaTiO3 in PVDF led to a piezoelectric output of 0.88 V during dynamic cycle tests at 1 Hz. Encouragingly, the output signal exhibited a robust linear correlation (R2 = 0.996) with applied compression force.