Scholarlink

<p>The development of solar laser systems that combine high efficiency and cost-effectiveness is key to the practical implementation of this renewable technology. This paper presents the outcomes of the assessment of a solar laser prototype performed in the focal zone of a Fresnel lens, where it successfully emitted four laser beams at the same time. It featured an aspheric lens, a conical pump cavity, and four Ce:Nd:YAG rods arranged in an end-side pump configuration. A total laser power of 22.46 W was achieved with a 0.9&#xa0;m collection diameter, corresponding to a 4.49% solar-to-laser power conversion efficiency. This efficiency represents a new benchmark for Fresnel lens systems, reflecting a 16% increase over the previous record. A slope efficiency of 6.76% was also attained, indicating a 7% enhancement. Furthermore, the employment of four rods enabled sustained laser operation for 112&#xa0;s without reliance on solar tracking assistance. This performance was observed around local solar noon, during which the focal zone underwent a displacement of 0.80° in the azimuthal direction and 0.09° in the altitudinal direction. These outcomes indicate that multirod solar laser systems that involve Fresnel lenses can still be competitive with those employing parabolic mirrors while also being economically advantageous.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Four-Ce:Nd:YAG-rod solar laser with 4.49% conversion efficiency through Fresnel lens

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年4月17日

查看全文
  • Hugo Costa,
  • Dawei Liang,
  • Joana Almeida,
  • Bruno D. Tibúrcio,
  • Cláudia R. Vistas

摘要

The development of solar laser systems that combine high efficiency and cost-effectiveness is key to the practical implementation of this renewable technology. This paper presents the outcomes of the assessment of a solar laser prototype performed in the focal zone of a Fresnel lens, where it successfully emitted four laser beams at the same time. It featured an aspheric lens, a conical pump cavity, and four Ce:Nd:YAG rods arranged in an end-side pump configuration. A total laser power of 22.46 W was achieved with a 0.9 m collection diameter, corresponding to a 4.49% solar-to-laser power conversion efficiency. This efficiency represents a new benchmark for Fresnel lens systems, reflecting a 16% increase over the previous record. A slope efficiency of 6.76% was also attained, indicating a 7% enhancement. Furthermore, the employment of four rods enabled sustained laser operation for 112 s without reliance on solar tracking assistance. This performance was observed around local solar noon, during which the focal zone underwent a displacement of 0.80° in the azimuthal direction and 0.09° in the altitudinal direction. These outcomes indicate that multirod solar laser systems that involve Fresnel lenses can still be competitive with those employing parabolic mirrors while also being economically advantageous.