<p>Controlling degradation rate is essential for the biomedical application of biodegradable Zn alloys. Alloying with soluble elements is an effective way to regulate formation of second phases, which differ in potential from the Zn matrix. The potential difference exhibits positive or negative effects on corrosion resistance. This study successfully forms MnZn₁₃ phase with nano size by altering ECAP temperature. Subsequently, MnZn₁₃ phase promotes grain refinement, improvement of elongation, and corrosion resistance. Higher elongation in Zn-Mn alloy with MnZn₁₃ phase is attributed to the grain boundary sliding, deformation twins in MnZn₁₃ phase. Meanwhile, grain boundary corrosion in Zn-Mn alloy with MnZn₁₃ phase is incomplete. Corrosion mode of Zn-Mn alloys without MnZn₁₃ phase is dominated by grain boundary corrosion, accompanied by pitting corrosion. The increased corrosion resistance from MnZn₁₃ phase stems from its higher potential than Zn matrix. Zn-Mn alloys with and without MnZn₁₃ phase show a comparable cytocompatibility and osteogenic properties. Our findings provide an effective way to regulating mechanical properties and corrosion resistance of Zn alloys via controlling precipitation.</p>