Scholarlink

<p>The current study demonstrates a dual and wideband mmWave 4 × 4 port MIMO antenna for 5G and beyond applications. The proposed antenna is derived from a traditional inset-fed rectangular geometry, modified with multiple curved edges on the top plane to produce a large effective aperture and enable significant surface current distribution. Partial ground planes are connected using 45° tilted conducting strips to form a common ground, which enhances surface current distribution and balances power through each port. The antenna exhibits wide bandwidths of 2.3–6.5&#xa0;GHz at resonant frequencies of 28–38&#xa0;GHz, respectively. Moreover, the suggested antenna yields more than 21&#xa0;dB isolation, 8.3&#xa0;dB peak gain, 92% radiation efficiency, 89% multiplexing efficiency, an ECC of 0.00007, and a channel capacity of 21 bit/s/Hz. To validate the antenna design, the prototype was fabricated on a Rogers RT/Duroid 5880™ substrate, tested, and compared with simulated results, showing good agreement.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Dual and wideband mmWave 28/38 GHz quad port MIMO antenna for 5G and beyond applications

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年11月22日

查看全文
  • R. Sethumadhavi,
  • Brijesh Mishra,
  • Aditya Kumar Singh,
  • Dinesh Yadav,
  • Supraja Eduru,
  • T. Y. Satheesha

摘要

The current study demonstrates a dual and wideband mmWave 4 × 4 port MIMO antenna for 5G and beyond applications. The proposed antenna is derived from a traditional inset-fed rectangular geometry, modified with multiple curved edges on the top plane to produce a large effective aperture and enable significant surface current distribution. Partial ground planes are connected using 45° tilted conducting strips to form a common ground, which enhances surface current distribution and balances power through each port. The antenna exhibits wide bandwidths of 2.3–6.5 GHz at resonant frequencies of 28–38 GHz, respectively. Moreover, the suggested antenna yields more than 21 dB isolation, 8.3 dB peak gain, 92% radiation efficiency, 89% multiplexing efficiency, an ECC of 0.00007, and a channel capacity of 21 bit/s/Hz. To validate the antenna design, the prototype was fabricated on a Rogers RT/Duroid 5880™ substrate, tested, and compared with simulated results, showing good agreement.