Scholarlink

<p>This research looked at how much Urotropine can be adsorbed by kaolinite particles and the thermodynamics of that process. Since Urotropine is important for gel injections and stabilizing clay, understanding how it adsorbs onto clay can help us accurately model various related processes. Initially, X-ray diffraction (XRD) analysis was conducted on kaolinite samples, verifying their high purity (97%) and correct crystal structure. Subsequent experiments focused on the adsorption of Urotropine from solutions of varying concentrations onto the kaolinite particles. By monitoring Urotropine’s concentration in the aqueous solution with a UV device, we observed that kaolinite efficiently adsorbs Urotropine, reaching an adsorption capacity of 112&#xa0;mg/g. Notably, the Langmuir adsorption isotherm model provided the best fit for predicting this Urotropine adsorption behavior. Further experiments at elevated temperatures, coupled with thermodynamic modeling, revealed an enthalpy of 9534&#xa0;J/mole, confirming the endothermic nature of the adsorption. The consistently negative Gibbs free energy (∆G°) across all temperatures indicated that Urotropine adsorption on kaolinite is spontaneous. Core flooding experiments, using a 10<sup>5</sup>&#xa0;ppm Urotropine solution injected into kaolinite sand-packs, also confirmed the endothermic reaction. However, these experiments showed a significantly lower adsorption capacity compared to batch experiments. This reduction is attributed to the complexity of the porous media and the presence of inaccessible adsorption sites within the sand-packs.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Modeling Urotropine adsorption thermodynamic on kaolinite particles

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年10月8日

查看全文
  • Qingling Zhu,
  • Zahraa Sabah Ghnim,
  • Subhash Chandra,
  • Jayanti Makasana,
  • Subbulakshmi Ganesan,
  • Aman Shankhyan,
  • M. Ravi Kumar,
  • Girish Chandra Sharma,
  • Ayat Hussein Adhab,
  • Morug Salih Mahdi,
  • Aseel Salah Mansoor,
  • Usama Kadem Radi,
  • Nasr Saadoun Abd,
  • Khaled Herati,
  • Khursheed Muzammil

摘要

This research looked at how much Urotropine can be adsorbed by kaolinite particles and the thermodynamics of that process. Since Urotropine is important for gel injections and stabilizing clay, understanding how it adsorbs onto clay can help us accurately model various related processes. Initially, X-ray diffraction (XRD) analysis was conducted on kaolinite samples, verifying their high purity (97%) and correct crystal structure. Subsequent experiments focused on the adsorption of Urotropine from solutions of varying concentrations onto the kaolinite particles. By monitoring Urotropine’s concentration in the aqueous solution with a UV device, we observed that kaolinite efficiently adsorbs Urotropine, reaching an adsorption capacity of 112 mg/g. Notably, the Langmuir adsorption isotherm model provided the best fit for predicting this Urotropine adsorption behavior. Further experiments at elevated temperatures, coupled with thermodynamic modeling, revealed an enthalpy of 9534 J/mole, confirming the endothermic nature of the adsorption. The consistently negative Gibbs free energy (∆G°) across all temperatures indicated that Urotropine adsorption on kaolinite is spontaneous. Core flooding experiments, using a 105 ppm Urotropine solution injected into kaolinite sand-packs, also confirmed the endothermic reaction. However, these experiments showed a significantly lower adsorption capacity compared to batch experiments. This reduction is attributed to the complexity of the porous media and the presence of inaccessible adsorption sites within the sand-packs.