Scholarlink

<p>Traditional CNC machine tool feed system models suffer from low simulation accuracy and limited generalizability. These issues arise from simplified process replication and rigid optimization methods based on mechanical knowledge. To address these challenges, this study proposes a new hybrid mechanism data-driven digital twin (DT) modeling framework. Firstly, a nonlinear coupling characterization method was developed by combining fuzzy proportional integral (PI) control with mechanical system dynamics. This method achieves real-time adaptive parameter updating of the feeding system, and compared with traditional models, the maximum error is reduced by 32.79%. To further address the inherent simplification characteristics of the mechanism model, a WOA-CNN-LSTM-Attention algorithm was independently constructed for compensation, and experimental verification through physical machine operation confirmed that the maximum error was reduced from 0.0576mm to 0.0121mm. Finally, an online recognition system with a recursive least squares multiplication with a forgetting factor was used to achieve fast parameter convergence: tracking for 0.005 seconds in simple cases and 0.01 seconds in complex cases, achieving real-time DT synchronization. This study provides a systematic solution for building stable and efficient DT systems in precision manufacturing applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

A method for constructing digital twins of CNC machine tools feed systems based on hybrid mechanism-data

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年9月1日

查看全文
  • Ruiqi Zhao,
  • Hua Huang,
  • Le Mei

摘要

Traditional CNC machine tool feed system models suffer from low simulation accuracy and limited generalizability. These issues arise from simplified process replication and rigid optimization methods based on mechanical knowledge. To address these challenges, this study proposes a new hybrid mechanism data-driven digital twin (DT) modeling framework. Firstly, a nonlinear coupling characterization method was developed by combining fuzzy proportional integral (PI) control with mechanical system dynamics. This method achieves real-time adaptive parameter updating of the feeding system, and compared with traditional models, the maximum error is reduced by 32.79%. To further address the inherent simplification characteristics of the mechanism model, a WOA-CNN-LSTM-Attention algorithm was independently constructed for compensation, and experimental verification through physical machine operation confirmed that the maximum error was reduced from 0.0576mm to 0.0121mm. Finally, an online recognition system with a recursive least squares multiplication with a forgetting factor was used to achieve fast parameter convergence: tracking for 0.005 seconds in simple cases and 0.01 seconds in complex cases, achieving real-time DT synchronization. This study provides a systematic solution for building stable and efficient DT systems in precision manufacturing applications.