Scholarlink

<p>In this paper, the microstructure and mechanical properties of a high Nb–TiAl alloy with different carbon contents were characterized and measured, and the influence mechanisms of carbon addition were discussed. The results indicate that, the added carbon was first dissolved in alloy matrix and caused lattice distortion in α₂-Ti<sub>3</sub>Al and γ-TiAl. Exceeding its solid solubility, which was proved to be about 0.6 at%, the extra carbon was precipitated in the form of Ti<sub>2</sub>AlC. In addition, with the increasing of carbon content, the volume fractions of the α₂ phase and Ti<sub>2</sub>AlC enhancement phase increased, while the relative contents of γ phase and B2 phase decreased. Under the synergistic effects of phase composition, C solid solution strengthening, Ti<sub>2</sub>AlC precipitation strengthening and fine crystal strengthening, the high Nb-TiAl-0.6&#xa0;C alloy exhibits the best overall performance, especially the high temperature compression performance. Compared with the original alloy without carbon addition, at 800 °C, its compressive stress increases from 900&#xa0;MPa to 1074&#xa0;MPa and compressive strain corresponding to the maximum compressive stress increases from 11.3 to 12.5% respectively.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Microstructure and mechanical properties of a high Nb–TiAl alloy with different carbon additions

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年8月11日

查看全文
  • Feng Huang,
  • Jiaguo Xu,
  • Zihao Zhan,
  • Zhe Cheng,
  • Yanxiong Liu

摘要

In this paper, the microstructure and mechanical properties of a high Nb–TiAl alloy with different carbon contents were characterized and measured, and the influence mechanisms of carbon addition were discussed. The results indicate that, the added carbon was first dissolved in alloy matrix and caused lattice distortion in α₂-Ti3Al and γ-TiAl. Exceeding its solid solubility, which was proved to be about 0.6 at%, the extra carbon was precipitated in the form of Ti2AlC. In addition, with the increasing of carbon content, the volume fractions of the α₂ phase and Ti2AlC enhancement phase increased, while the relative contents of γ phase and B2 phase decreased. Under the synergistic effects of phase composition, C solid solution strengthening, Ti2AlC precipitation strengthening and fine crystal strengthening, the high Nb-TiAl-0.6 C alloy exhibits the best overall performance, especially the high temperature compression performance. Compared with the original alloy without carbon addition, at 800 °C, its compressive stress increases from 900 MPa to 1074 MPa and compressive strain corresponding to the maximum compressive stress increases from 11.3 to 12.5% respectively.