Scholarlink

<p>A high surface area ZnO support (HSA-ZnO) has been fabricated in a unique thermal decomposition process using broken rice grains as a sacrificial template, zinc acetate trihydrate as ZnO precursor. As-prepared ZnO support exhibited a surface area of 145&#xa0;m<sup>2</sup>/gm, which is six times higher than the commercial ZnO. Further, copper-supported HSA-ZnO catalysts with different copper loadings (4, 8, 12 and 16 wt%) were prepared by using wet impregnation method and characterized by physicochemical techniques such as X-ray diffraction (XRD), Thermal gravimetric analysis(TGA), BET surface area, CO<sub>2</sub> temperature programmed desorption of (CO<sub>2</sub>-TPD), temperature programmed reduction(TPR) and N<sub>2</sub>O pulse chemisorption measurements. The catalytic activity of all the prepared catalysts were tested in dehydrogenation of cyclohexanol in a continuous flow reactor. A variety of reaction factors were examined, including the impact of temperature, the influence of copper loadings, and the catalysts stability. Lab-made HSA ZnO presented better properties than the commercial and the one without sacrificial template preparation. Among all the catalysts, 12 wt% Cu/HSA-ZnO catalyst exhibited the highest conversion (75%) and cyclohexanone selectivity (89%). The high activity and stability of optimal 12 wt% Cu-loaded catalysts are due to highly dispersed copper particles, better reducibility, and the strong interactions between the Cu particles and rice-derived ZnO support.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Selective dehydrogenation of cyclohexanol to cyclohexanone over biomorphic Cu/ZnO catalysts

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年9月30日

查看全文
  • Sivudu Chiragoni,
  • Kumara Swamy Koppadi,
  • Saidulu Ganji,
  • Nagaraju Nekkala,
  • Kavitha Siddoju

摘要

A high surface area ZnO support (HSA-ZnO) has been fabricated in a unique thermal decomposition process using broken rice grains as a sacrificial template, zinc acetate trihydrate as ZnO precursor. As-prepared ZnO support exhibited a surface area of 145 m2/gm, which is six times higher than the commercial ZnO. Further, copper-supported HSA-ZnO catalysts with different copper loadings (4, 8, 12 and 16 wt%) were prepared by using wet impregnation method and characterized by physicochemical techniques such as X-ray diffraction (XRD), Thermal gravimetric analysis(TGA), BET surface area, CO2 temperature programmed desorption of (CO2-TPD), temperature programmed reduction(TPR) and N2O pulse chemisorption measurements. The catalytic activity of all the prepared catalysts were tested in dehydrogenation of cyclohexanol in a continuous flow reactor. A variety of reaction factors were examined, including the impact of temperature, the influence of copper loadings, and the catalysts stability. Lab-made HSA ZnO presented better properties than the commercial and the one without sacrificial template preparation. Among all the catalysts, 12 wt% Cu/HSA-ZnO catalyst exhibited the highest conversion (75%) and cyclohexanone selectivity (89%). The high activity and stability of optimal 12 wt% Cu-loaded catalysts are due to highly dispersed copper particles, better reducibility, and the strong interactions between the Cu particles and rice-derived ZnO support.