Scholarlink

<p>30/70 wt.% poly (vinyl chloride-co-vinyl acetate-co-2-hydroxypropyl acrylate) (PVVH) / poly (vinylidene fluoride-co-trifluoroethylene) P(VDF-TrFE) polymer blend (PB) are prepared and doped with various content of Zinc oxide nanoparticle (ZnO NPs) using casting technique. X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Transmission electron microscopy (TEM), UV–Vis and Thermogravimetric analysis (TGA) are used for structural, optical and thermal properties investigation. XRD results revealed that the crystallinity degree of PB is enhanced from 83.8 to 92.3% upon increasing the ZnO NPs. FTIR analysis showed a shift in position of some characteristic bands, confirming the complexation between ZnO NPs and functional groups of PB. UV–Vis analysis showed that both direct and indirect energy gaps (<i>E</i><sub><i>dg</i></sub><i>/E</i><sub><i>ig</i></sub>) are reduced from (4.08/2.34) for PB to (3.65/1.99) eV for 1.25 wt% ZnO/PB nanocomposite. Thermally stimulated depolarization current (TSDC) measurements demonstrated that the phase transition from ferroelectric to paraelectric phase occurred at 343 K for PB and increased to 350 K after embedding ZnO NPs. Thermal sampling (TS) technique is applied and thermodynamic parameters are estimated. Piezoelectric coefficient (d<sub>33</sub>) is optimized from 12.8 pC/N for PB sample to 23.7 pC/N for 1wt.% ZnO/PB nanocomposite at 6.24 × 10<sup>5</sup> Pa. Our results give a prediction for new piezoelectric material design capable for various energy harvesting applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Investigation and optimization of the piezoelectric nanocomposite ZnO/PVVH/P(VDF-TrFE) for energy harvesting applications

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年6月23日

查看全文
  • A. Sarhan,
  • A. Hassan,
  • M. I. Abdelhamid,
  • T. Fahmy,
  • A. Habib

摘要

30/70 wt.% poly (vinyl chloride-co-vinyl acetate-co-2-hydroxypropyl acrylate) (PVVH) / poly (vinylidene fluoride-co-trifluoroethylene) P(VDF-TrFE) polymer blend (PB) are prepared and doped with various content of Zinc oxide nanoparticle (ZnO NPs) using casting technique. X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Transmission electron microscopy (TEM), UV–Vis and Thermogravimetric analysis (TGA) are used for structural, optical and thermal properties investigation. XRD results revealed that the crystallinity degree of PB is enhanced from 83.8 to 92.3% upon increasing the ZnO NPs. FTIR analysis showed a shift in position of some characteristic bands, confirming the complexation between ZnO NPs and functional groups of PB. UV–Vis analysis showed that both direct and indirect energy gaps (Edg/Eig) are reduced from (4.08/2.34) for PB to (3.65/1.99) eV for 1.25 wt% ZnO/PB nanocomposite. Thermally stimulated depolarization current (TSDC) measurements demonstrated that the phase transition from ferroelectric to paraelectric phase occurred at 343 K for PB and increased to 350 K after embedding ZnO NPs. Thermal sampling (TS) technique is applied and thermodynamic parameters are estimated. Piezoelectric coefficient (d33) is optimized from 12.8 pC/N for PB sample to 23.7 pC/N for 1wt.% ZnO/PB nanocomposite at 6.24 × 105 Pa. Our results give a prediction for new piezoelectric material design capable for various energy harvesting applications.