Scholarlink

<p>This paper presents the tribological properties and bioactivity of nanostructured hydroxyapatite (HA) from biowaste sources and coated onto Ti-6Al-4V substrates using a novel pack cementation method. The process introduced HA pillars/nanorods on the surfaces of Ti-6Al-4V to enhance their osseointegration for dental implants. The mechanical and tribological properties were studied with nanoindentation, and pin-on-disk techniques, following the microstructural characterization of the coatings with atomic force microscopy, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and energy dispersive x-ray spectroscopy. The study also examines the surface bioactivity and elucidates the underlying friction and wear mechanisms of the HA-coated and annealed Ti-6Al-4V surface. The study results show a bone bonding capacity of the biowaste-derived HA-coated substrate with improved hardness and tribological properties. The implications of the study are discussed for the development of nano-structured HA-coated Ti-6Al-4V for dental implants with improved osseointegration for dental and biomedical applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Tribological properties of hydroxyapatite-coated nanorods on Ti-6Al-4V surfaces

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月31日

查看全文
  • Sarah Akua Osafo,
  • Tabiri Asumadu,
  • Desmond Klenam,
  • Precious Etinosa,
  • John David Obayemi,
  • Benjamin Agyei-Tuffour,
  • Abu Yaya,
  • David Dodoo-Arhin,
  • Stanley Chijioke Eluu,
  • Wole Soboyejo

摘要

This paper presents the tribological properties and bioactivity of nanostructured hydroxyapatite (HA) from biowaste sources and coated onto Ti-6Al-4V substrates using a novel pack cementation method. The process introduced HA pillars/nanorods on the surfaces of Ti-6Al-4V to enhance their osseointegration for dental implants. The mechanical and tribological properties were studied with nanoindentation, and pin-on-disk techniques, following the microstructural characterization of the coatings with atomic force microscopy, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and energy dispersive x-ray spectroscopy. The study also examines the surface bioactivity and elucidates the underlying friction and wear mechanisms of the HA-coated and annealed Ti-6Al-4V surface. The study results show a bone bonding capacity of the biowaste-derived HA-coated substrate with improved hardness and tribological properties. The implications of the study are discussed for the development of nano-structured HA-coated Ti-6Al-4V for dental implants with improved osseointegration for dental and biomedical applications.