Scholarlink

<p>Advances in battery technology have been impeded by the voltage constraints of electrolytes. Here we present a high-energy all-solid-state battery design featuring &gt;5 V operation and an ultrahigh areal capacity of 35.3 mAh cm<sup>−2</sup>; these attributes were enabled by a highly conductive and ultrahigh-voltage stable fluoride solid electrolyte, LiCl–4Li<sub>2</sub>TiF<sub>6</sub> (1.7 × 10<sup>−5</sup> S cm<sup>−1</sup> at 30 °C). LiCl–4Li<sub>2</sub>TiF<sub>6</sub> shields high-voltage spinel oxide cathodes, achieving 106 mAh g<sup>−1</sup> at 2C with 75.2% retention over 500 cycles for LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub>, sharply contrasting with the conventional LiNbO<sub>3</sub> counterpart, which decomposes and fails to prevent detrimental interfacial degradation. The efficacy of LiCl–4Li<sub>2</sub>TiF<sub>6</sub> is validated across various systems, including LiCoMnO<sub>4</sub>, LiFe<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> and pouch-type LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub>||Li (or Ag–C) all-solid-state batteries, and further demonstrated by operability down to 2.3 V with 258 mAh g<sup>−1</sup> and ultrathick 1.8-mm electrodes. This shielding layer with &gt;5 V stability introduces a transformative design paradigm by revisiting the previously forbidden high-voltage cathodes.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Five-volt-class high-capacity all-solid-state lithium batteries

  • 期刊论文

  • 发表日期：

    2025年10月3日

查看全文
  • Jun Pyo Son,
  • Juhyoun Park,
  • Hae-Yong Kim,
  • Jae-Seung Kim,
  • Yong Bae Song,
  • Changhoon Kim,
  • Donghyeok Kim,
  • Jong Seok Kim,
  • Junwoo Lee,
  • Sunho Ko,
  • Soon-Jae Jung,
  • Seungwoo Choi,
  • Docheon Ahn,
  • Keun Hwa Chae,
  • Gihan Kwon,
  • Dominik Wierzbicki,
  • Yonghua Du,
  • Hyun-Wook Lee,
  • Dong-Hwa Seo,
  • Kyung-Wan Nam,
  • Yoon Seok Jung

摘要

Advances in battery technology have been impeded by the voltage constraints of electrolytes. Here we present a high-energy all-solid-state battery design featuring >5 V operation and an ultrahigh areal capacity of 35.3 mAh cm−2; these attributes were enabled by a highly conductive and ultrahigh-voltage stable fluoride solid electrolyte, LiCl–4Li2TiF6 (1.7 × 10−5 S cm−1 at 30 °C). LiCl–4Li2TiF6 shields high-voltage spinel oxide cathodes, achieving 106 mAh g−1 at 2C with 75.2% retention over 500 cycles for LiNi0.5Mn1.5O4, sharply contrasting with the conventional LiNbO3 counterpart, which decomposes and fails to prevent detrimental interfacial degradation. The efficacy of LiCl–4Li2TiF6 is validated across various systems, including LiCoMnO4, LiFe0.5Mn1.5O4 and pouch-type LiNi0.5Mn1.5O4||Li (or Ag–C) all-solid-state batteries, and further demonstrated by operability down to 2.3 V with 258 mAh g−1 and ultrathick 1.8-mm electrodes. This shielding layer with >5 V stability introduces a transformative design paradigm by revisiting the previously forbidden high-voltage cathodes.