Scholarlink

<p>Hot corrosion behavior of Ni-based single-crystal turbine blade film cooling holes at 900 °C was investigated in three mixed salts and compared with a sample without holes. The results indicate that the hot corrosion degree in the 75% Na₂SO₄ + 15% NaCl+10% NaVO₃ is the most serious, followed by 75% Na₂SO₄ + 25% NaCl, and 75% Na₂SO₄ + 25% NaVO₃ is the least. Moreover, analysis reveals a synergistic interaction among the three mixed salts: S acts as the primary corrosive species, while Cl and V function as secondary accelerants of hot corrosion. Electrical discharge machining (EDM) may change the element distribution around the holes, leading to the formation of a more stable Al₂O₃ layer around the holes after hot corrosion, which may contribute to the lower corrosion severity observed near the hole region.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Mixed molten salts hot corrosion behavior of nickel-based single-crystal film-cooling holes under static air at 900 °C

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年4月10日

查看全文
  • Dongxu Zhang,
  • Zixuan Meng,
  • Zhongli Qiao,
  • Zhenyu Xin,
  • Lijun Yang

摘要

Hot corrosion behavior of Ni-based single-crystal turbine blade film cooling holes at 900 °C was investigated in three mixed salts and compared with a sample without holes. The results indicate that the hot corrosion degree in the 75% Na₂SO₄ + 15% NaCl+10% NaVO₃ is the most serious, followed by 75% Na₂SO₄ + 25% NaCl, and 75% Na₂SO₄ + 25% NaVO₃ is the least. Moreover, analysis reveals a synergistic interaction among the three mixed salts: S acts as the primary corrosive species, while Cl and V function as secondary accelerants of hot corrosion. Electrical discharge machining (EDM) may change the element distribution around the holes, leading to the formation of a more stable Al₂O₃ layer around the holes after hot corrosion, which may contribute to the lower corrosion severity observed near the hole region.