Scholarlink

<p>The mechanical similarity between bioelectronic platforms and native tissue microenvironments is critical for successful cell-microdevice interfacing. Advances in high-resolution microfabrication have enabled the creation of 3D conductive microstructures; however, these approaches typically yield to structures that are electrically active but mechanically stiff relative to biological tissues. In this work, we present a strategy for the fabrication of soft 3D bioelectronic interfaces by blending PEDOT:PSS with a methacrylate-modified gelatin and leveraging two-photon polymerization lithography for micropatterning. Incorporating the conducting polymer into the hydrogel matrix resulted in reduced electrical impedance and exhibited soft mechanical properties both at the macro- and micro-scale. Here, the conductive hydrogel blends have been 3D printed, their versatility was assessed through different geometries and were used for neuronal cell culture. This approach enables the fabrication of soft neural interfaces with biomimetic architectures, using multimaterial blends, supporting improved electrical and mechanical integration at the cell-electrode interface.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

3D micropatterning of PEDOT:PSS/Gelatin conductive hydrogels via two-photon lithography for soft bioelectronics

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年1月30日

查看全文
  • Marco Buzio,
  • Martina Gini,
  • Tom C. Schneider,
  • Nevena Stajkovic,
  • Sven Ingebrandt,
  • Laura De Laporte,
  • Andreas Offenhäusser,
  • Valeria Criscuolo,
  • Francesca Santoro

摘要

The mechanical similarity between bioelectronic platforms and native tissue microenvironments is critical for successful cell-microdevice interfacing. Advances in high-resolution microfabrication have enabled the creation of 3D conductive microstructures; however, these approaches typically yield to structures that are electrically active but mechanically stiff relative to biological tissues. In this work, we present a strategy for the fabrication of soft 3D bioelectronic interfaces by blending PEDOT:PSS with a methacrylate-modified gelatin and leveraging two-photon polymerization lithography for micropatterning. Incorporating the conducting polymer into the hydrogel matrix resulted in reduced electrical impedance and exhibited soft mechanical properties both at the macro- and micro-scale. Here, the conductive hydrogel blends have been 3D printed, their versatility was assessed through different geometries and were used for neuronal cell culture. This approach enables the fabrication of soft neural interfaces with biomimetic architectures, using multimaterial blends, supporting improved electrical and mechanical integration at the cell-electrode interface.