Scholarlink

<p>Conductive polymers like poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT: PSS) are key materials in bioelectronics, but balancing ultrahigh conductivity with long-term tissue contact stability remains a challenge. Here, we present a solvent-mediated solid-liquid interface doping strategy to engineer vertically phase-separated (VPS) PEDOT: PSS films. By adjusting thickness and doping solvents, a thicker PEDOT: PSS film with a strong VPS structure was achieved, featuring a higher PSS/PEDOT ratio on the surface and a lower ratio at the bottom. Doping the pristine film with a metastable liquid-liquid contact solution enables gradual PSS migration and a significant component gradient, yielding films with a hydrophilic surface and one of the highest reported conductivities ( ~ 8800 S cm<sup>−1</sup>) for bioelectronic devices. The films patterned by laser processing present high-fidelity signal acquisition, and excellent electrochemical stability. With low impedance and long-term biocompatibility, they are employed for real-time wearable and implantable sensors for electrophysiological monitoring, showcasing broad potentials in bioelectronics and human–machine interactions.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Highly conductive polymer with vertical phase separation for enhanced bioelectronic interfaces

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年7月15日

查看全文
  • Jiahuan Qiu,
  • Yuyao Lu,
  • Xinyuan Qian,
  • Junxian Yao,
  • Chengcan Han,
  • Ziliang Wu,
  • Hui Ye,
  • Guorong Shan,
  • Qiang Zheng,
  • Kaichen Xu,
  • Miao Du

摘要

Conductive polymers like poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT: PSS) are key materials in bioelectronics, but balancing ultrahigh conductivity with long-term tissue contact stability remains a challenge. Here, we present a solvent-mediated solid-liquid interface doping strategy to engineer vertically phase-separated (VPS) PEDOT: PSS films. By adjusting thickness and doping solvents, a thicker PEDOT: PSS film with a strong VPS structure was achieved, featuring a higher PSS/PEDOT ratio on the surface and a lower ratio at the bottom. Doping the pristine film with a metastable liquid-liquid contact solution enables gradual PSS migration and a significant component gradient, yielding films with a hydrophilic surface and one of the highest reported conductivities ( ~ 8800 S cm−1) for bioelectronic devices. The films patterned by laser processing present high-fidelity signal acquisition, and excellent electrochemical stability. With low impedance and long-term biocompatibility, they are employed for real-time wearable and implantable sensors for electrophysiological monitoring, showcasing broad potentials in bioelectronics and human–machine interactions.