Scholarlink

<p>Increasing the proximity of microelectrode arrays (MEA) to targeted neural tissues can establish efficient neural interfaces for both recording and stimulation applications. This has been achieved by constructing protruding three-dimensional (3D) structures on top of conventional planar microelectrodes via additional micromachining steps. However, this approach adds fabrication complexities and limits the 3D structures to certain shapes. We propose a one-step fabrication of MEAs with versatile microscopic 3D structures via “microelectrothermoforming (μETF)” of thermoplastics, by utilizing 3D-printed molds to locally deform planar MEAs into protruding and recessing shapes. Electromechanical optimization enabled a 3D MEA with 80 μm protrusions and/or recession for 100 μm diameter. Its simple and versatile shaping capabilities are demonstrated by diverse 3D structures on a single MEA. The benefits of 3D MEA are evaluated in retinal stimulation through numerical simulations and ex vivo experiments, confirming a threshold lowered by 1.7 times and spatial resolution enhanced by 2.2 times.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Microelectrothermoforming (μETF): one-step versatile 3D shaping of flexible microelectronics for enhanced neural interfaces

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年1月22日

查看全文
  • Dong Hyeon Lee,
  • Younghoon Park,
  • Yoon Seo,
  • Hannah Noh,
  • Hyunbeen Jeong,
  • Jongmo Seo,
  • Min-Ho Seo,
  • Kyungsik Eom,
  • Joonsoo Jeong

摘要

Increasing the proximity of microelectrode arrays (MEA) to targeted neural tissues can establish efficient neural interfaces for both recording and stimulation applications. This has been achieved by constructing protruding three-dimensional (3D) structures on top of conventional planar microelectrodes via additional micromachining steps. However, this approach adds fabrication complexities and limits the 3D structures to certain shapes. We propose a one-step fabrication of MEAs with versatile microscopic 3D structures via “microelectrothermoforming (μETF)” of thermoplastics, by utilizing 3D-printed molds to locally deform planar MEAs into protruding and recessing shapes. Electromechanical optimization enabled a 3D MEA with 80 μm protrusions and/or recession for 100 μm diameter. Its simple and versatile shaping capabilities are demonstrated by diverse 3D structures on a single MEA. The benefits of 3D MEA are evaluated in retinal stimulation through numerical simulations and ex vivo experiments, confirming a threshold lowered by 1.7 times and spatial resolution enhanced by 2.2 times.