Scholarlink

<p>Carrier mobility has conventionally been manipulated to enhance thermoelectric performance by reducing crystal defects. Therefore, an effective strategy for optimizing carrier mobility is highly desired for nanostructured materials. In this work, InSb nanoprecipitates are formed in situ within the nanostructured MgAgSb matrix, serving as channels for accelerating charge carriers. A high carrier mobility of 93.1 cm<sup>2 </sup>V<sup>-1</sup> s<sup>-1</sup> is achieved in MgAg<sub>0.97</sub>Sb<sub>0.99</sub>-0.02InSb composite at 300 K, resulting in an average power factor of 23.8 μW cm<sup>-1</sup> K<sup>-2</sup> from 300 K to 553 K. To address the efficiency degradation caused by the narrow operational temperature range of MgAgSb, a two-pair segmented thermoelectric module is developed. A high conversion efficiency of 12.4% is achieved under a cold-side temperature of ~293 K and a temperature difference of ~540 K, presenting an effective strategy for carrier mobility optimization and opening new avenues for medium-temperature waste heat harvesting using MgAgSb.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Boosting carrier mobility in MgAgSb via in-situ InSb nanoprecipitates for high-efficiency segmented thermoelectric module

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年8月12日

查看全文
  • Liangjun Xie,
  • Haoyang Tong,
  • Guyang Peng,
  • Hao Wu,
  • Wenjing Shi,
  • Kuai Yu,
  • Jinsuo Hu,
  • Lei Jiao,
  • Xingyan Dong,
  • Fengkai Guo,
  • Wei Cai,
  • Yang Zhang,
  • Haijun Wu,
  • Zihang Liu,
  • Jiehe Sui

摘要

Carrier mobility has conventionally been manipulated to enhance thermoelectric performance by reducing crystal defects. Therefore, an effective strategy for optimizing carrier mobility is highly desired for nanostructured materials. In this work, InSb nanoprecipitates are formed in situ within the nanostructured MgAgSb matrix, serving as channels for accelerating charge carriers. A high carrier mobility of 93.1 cm2 V-1 s-1 is achieved in MgAg0.97Sb0.99-0.02InSb composite at 300 K, resulting in an average power factor of 23.8 μW cm-1 K-2 from 300 K to 553 K. To address the efficiency degradation caused by the narrow operational temperature range of MgAgSb, a two-pair segmented thermoelectric module is developed. A high conversion efficiency of 12.4% is achieved under a cold-side temperature of ~293 K and a temperature difference of ~540 K, presenting an effective strategy for carrier mobility optimization and opening new avenues for medium-temperature waste heat harvesting using MgAgSb.