Scholarlink

<p>Laser additive manufacturing of pure copper (Cu) with complex geometries opens vast opportunities for the development of functional devices in microelectronics and telecommunication. However, laser additive manufacturing of high-resolution pure Cu remains a challenge. Here we report a facile oxide-dispersion-strengthening (ODS) strategy that enables additive manufacturing of Cu with sub-100 μm (~70 μm) resolution by laser powder-bed fusion. This ODS strategy starts with oxygen-assisted gas atomisation to introduce ultrafine Cu<sub>2</sub>O nanoparticles into the pure Cu powder feedstock. These nanoscale dispersoids not only improve the laser absorptivity and the viscosity of the melt but also promote dynamic wetting behaviour. The ODS Cu exhibits a remarkable yield strength of ~450 MPa and a large uniform elongation of ~12%, while preserving a high electrical conductivity. As an example, we printed an ODS Cu micro-architected terahertz antenna, which demonstrates a 2.5-fold improvement in signal intensity compared with traditional 3D-printed pure Cu antennas.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Oxide-dispersion-enabled laser additive manufacturing of high-resolution copper

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年4月4日

查看全文
  • Shuo Qu,
  • Liqiang Wang,
  • Shengbiao Zhang,
  • Chenfeng Yang,
  • Hou Yi Chia,
  • Gengbo Wu,
  • Zongxin Hu,
  • Junhao Ding,
  • Wentao Yan,
  • Yang Zhang,
  • Chi Hou Chan,
  • Wen Chen,
  • Yang Lu,
  • Xu Song

摘要

Laser additive manufacturing of pure copper (Cu) with complex geometries opens vast opportunities for the development of functional devices in microelectronics and telecommunication. However, laser additive manufacturing of high-resolution pure Cu remains a challenge. Here we report a facile oxide-dispersion-strengthening (ODS) strategy that enables additive manufacturing of Cu with sub-100 μm (~70 μm) resolution by laser powder-bed fusion. This ODS strategy starts with oxygen-assisted gas atomisation to introduce ultrafine Cu2O nanoparticles into the pure Cu powder feedstock. These nanoscale dispersoids not only improve the laser absorptivity and the viscosity of the melt but also promote dynamic wetting behaviour. The ODS Cu exhibits a remarkable yield strength of ~450 MPa and a large uniform elongation of ~12%, while preserving a high electrical conductivity. As an example, we printed an ODS Cu micro-architected terahertz antenna, which demonstrates a 2.5-fold improvement in signal intensity compared with traditional 3D-printed pure Cu antennas.