Scholarlink

<p>Ultra-high-performance concrete (UHPC) stands out for its high mechanical strength and durability, but its low water-to-binder ratio limits cement hydration and increases autogenous shrinkage, favoring the formation of microcracks that compromise long-term durability. Superabsorbent polymers (SAPs) have been used as internal curing agents, absorbing water during the mixing process and gradually releasing it to mitigate these effects. However, the water release from SAPs generates residual pores that can reduce mechanical strength. High-modulus polyethylene (HMPE) fibers act as crack-bridging elements, improving ductility and compensating for this strength loss. This study evaluated the synergistic interaction between SAPs and HMPE fibers in the physicochemical and mechanical behavior of UHPCs in two phases. In Phase I, three types of SAPs were incorporated into cement pastes. The pastes were characterized by isothermal calorimetry, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The SAP with the highest absorption capacity (SAP B) stood out for its greater efficiency in internal curing, promoting increased C–S–H formation and prolonged hydration. In Phase II, UHPC mixtures with isolated and combined additions of SAPs and HMPE fibers were analyzed in terms of rheological, mechanical, and microstructural properties. SAPs reduced shrinkage and mass loss but increased porosity, leading to a reduction in compressive strength. The incorporation of HMPE fibers mitigated this loss by increasing toughness and crack control. The combined action of SAP B and HMPE fiber presented the best overall performance, indicating a promising strategy for UHPCs in aggressive environments.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Synergistic contribution of superabsorbent polymers and HMPE fibers to UHPC performance

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年5月26日

查看全文
  • Priscila de Souza Maciel,
  • Maria Luiza Malta da Rocha Silva,
  • Paulo Cesar Correia Gomes,
  • Marcio Mateus Pimenta,
  • Augusto Cesar da Silva Bezerra

摘要

Ultra-high-performance concrete (UHPC) stands out for its high mechanical strength and durability, but its low water-to-binder ratio limits cement hydration and increases autogenous shrinkage, favoring the formation of microcracks that compromise long-term durability. Superabsorbent polymers (SAPs) have been used as internal curing agents, absorbing water during the mixing process and gradually releasing it to mitigate these effects. However, the water release from SAPs generates residual pores that can reduce mechanical strength. High-modulus polyethylene (HMPE) fibers act as crack-bridging elements, improving ductility and compensating for this strength loss. This study evaluated the synergistic interaction between SAPs and HMPE fibers in the physicochemical and mechanical behavior of UHPCs in two phases. In Phase I, three types of SAPs were incorporated into cement pastes. The pastes were characterized by isothermal calorimetry, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The SAP with the highest absorption capacity (SAP B) stood out for its greater efficiency in internal curing, promoting increased C–S–H formation and prolonged hydration. In Phase II, UHPC mixtures with isolated and combined additions of SAPs and HMPE fibers were analyzed in terms of rheological, mechanical, and microstructural properties. SAPs reduced shrinkage and mass loss but increased porosity, leading to a reduction in compressive strength. The incorporation of HMPE fibers mitigated this loss by increasing toughness and crack control. The combined action of SAP B and HMPE fiber presented the best overall performance, indicating a promising strategy for UHPCs in aggressive environments.