Scholarlink

<p>This study aims to enhance the limiting drawing ratio (LDR) of cold-rolled carbon steel SPCC (JIS G3141) to 3.0 by applying a novel technique known as sequential-action forming (SAF) with an inclined blank holder. This method delays cup wall stretching and fracturing as a result of thickness adjustment by reducing the intensity of material flow during deep drawing. The SAF technology improved the limiting drawing ratio (LDR) of SPCC steel from the conventional 2.2 to 3.0, representing a 36.4% enhancement, and successfully produced cups up to 42&#xa0;mm in height. Prior to experimentation, a finite-element simulation was conducted to evaluate the process parameters. Deep drawing tests on SPCC were carried out using FE simulations with the Yoshida 6th yield function to ensure the accuracy of the results.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Improvement of limiting drawing ratio of a SPCC steel using sequential action forming with inclined blank holder

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年9月29日

查看全文
  • Chalermpol Klaynil,
  • Pichai Janmanee,
  • Komgrit Lawanwong

摘要

This study aims to enhance the limiting drawing ratio (LDR) of cold-rolled carbon steel SPCC (JIS G3141) to 3.0 by applying a novel technique known as sequential-action forming (SAF) with an inclined blank holder. This method delays cup wall stretching and fracturing as a result of thickness adjustment by reducing the intensity of material flow during deep drawing. The SAF technology improved the limiting drawing ratio (LDR) of SPCC steel from the conventional 2.2 to 3.0, representing a 36.4% enhancement, and successfully produced cups up to 42 mm in height. Prior to experimentation, a finite-element simulation was conducted to evaluate the process parameters. Deep drawing tests on SPCC were carried out using FE simulations with the Yoshida 6th yield function to ensure the accuracy of the results.