Scholarlink

<p>Transition metal oxides (TMOs) are a promising class of materials for neuromorphic computing and processing systems demonstrating a variety of resistive switching (RS) mechanisms. However, little is known about the correlation between its stoichiometry and RS. This study is focused on the development and characterization of amorphous molybdenum oxide memristors with different stoichiometry. Fully-stoichiometric (MoO<sub>3</sub>) and hydrogenated sub-stoichiometric (H-MoO<sub>3 − x</sub>) amorphous molybdenum oxide thin films were developed via a hot-wire chemical vapor deposition system. Both, stoichiometric and hydrogenated sub-stoichiometric molybdenum oxide devices showed good resistive switching behavior. However, the fully-stoichiometric memristor exhibited better RS properties with endurance of 250 cycles, ON/OFF ratio ~ 10<sup>3</sup> and high retention of almost 3·10<sup>4</sup> s, compared with the poor RS behavior of the device based on the H-MoO<sub>3 − x</sub> film. This impressive memristive behavior could be attributed to the excess of oxygen vacancies in the case of fully-stoichiometric memristor in respect to the sub-stoichiometric H-MoO<sub>3 − x</sub> which play crucial role in the conductive behavior of the device. The high reproducibility observed in MoO<sub>3</sub>-based memristor highlights their potential for practical applications and scalability. Additionally, the outstanding features of the MoO<sub>3</sub> memristor demonstrated through its long-term potentiation (LTP), long-term depression (LTD), and spike-timing dependent plasticity (STDP) indicate that the fully stoichiometric molybdenum oxide memristor has significant potential for simulating biological synapses, opening doors to a new era in neuromorphic computing applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Amorphous, fully-stoichiometric molybdenum oxide for high performance nonvolatile resistive switching memory: the role of stoichiometry on synaptic plasticity

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年12月4日

查看全文
  • Gion Kalemai,
  • Konstantinos Aidinis,
  • Michael-Alexandros Kourtis,
  • Dimitris Davazoglou,
  • Anastasia Soultati

摘要

Transition metal oxides (TMOs) are a promising class of materials for neuromorphic computing and processing systems demonstrating a variety of resistive switching (RS) mechanisms. However, little is known about the correlation between its stoichiometry and RS. This study is focused on the development and characterization of amorphous molybdenum oxide memristors with different stoichiometry. Fully-stoichiometric (MoO3) and hydrogenated sub-stoichiometric (H-MoO3 − x) amorphous molybdenum oxide thin films were developed via a hot-wire chemical vapor deposition system. Both, stoichiometric and hydrogenated sub-stoichiometric molybdenum oxide devices showed good resistive switching behavior. However, the fully-stoichiometric memristor exhibited better RS properties with endurance of 250 cycles, ON/OFF ratio ~ 103 and high retention of almost 3·104 s, compared with the poor RS behavior of the device based on the H-MoO3 − x film. This impressive memristive behavior could be attributed to the excess of oxygen vacancies in the case of fully-stoichiometric memristor in respect to the sub-stoichiometric H-MoO3 − x which play crucial role in the conductive behavior of the device. The high reproducibility observed in MoO3-based memristor highlights their potential for practical applications and scalability. Additionally, the outstanding features of the MoO3 memristor demonstrated through its long-term potentiation (LTP), long-term depression (LTD), and spike-timing dependent plasticity (STDP) indicate that the fully stoichiometric molybdenum oxide memristor has significant potential for simulating biological synapses, opening doors to a new era in neuromorphic computing applications.